Communications

A high chirp opening a transmission, a run of beeps as the link locks on and a signal breaking into dropouts. Describe the communications sound and Morphic generates it clean, with no voice on the line.

  • Transmission chirps, a link locking on or a lost signal, each in your own words
  • Comms tones built for your lunar landing scene or a squad channel mid-mission
  • Clean tones with no voice on the line, ready to bracket your own dialogue
A hand pressing the talk key on a plain radio console under warm light against a pure black ground, a green indicator light flaring

Communications sounds for games, animation, and video edits

Transmission chirps

A high chirp in and a lower chirp out, twice, the tones that bracket each message in space missions and military radio.

Link established

Rising beeps, a burst of static and a click as the line opens, the moment two sides finally connect on a mission or a rescue call.

Squelch tail

A sharp burst of noise cut by a click, twice, the end of a radio call for police, pilots, security teams or a squad.

Data burst

A fast screech of digital warble, for coded messages, a satellite uplink, a hacker sending files or alien signals.

Signal lost

A carrier tone breaking into dropouts and a flat tone, the sound of contact cut off with a crew, a drone or a probe.

Incoming alert

A bright two-tone chime three times, for a console calling for attention, a ship hail or a dispatch desk lighting up.

Generate a communications sound from a prompt

Bir başlangıç noktası seçin, dilediğiniz gibi düzenleyin ve Morphic'te oluşturun.

Oluştur

Ways to use a communications sound effect

Make a message from command cut in

Transmission chirps on the frame the order arrives give the line its authority, in space films, military games and animated sci-fi.

Prompt'u düzenleyin
Make a message from command cut in

Fill a tense radio silence without music

Squelch tails between unanswered calls carry a long wait for a reply with no score, in thrillers, rescue dramas, games and audio fiction.

Prompt'u düzenleyin
Fill a tense radio silence without music

Set a mission control mood in one shot

An incoming alert chiming over the opening shot places the audience in a control room as something begins, for space films, sims and podcasts.

Prompt'u düzenleyin
Set a mission control mood in one shot

Hint that the team has lost contact

A signal breaking up over a shot of an empty headset says the crew is gone without a word spoken, in horror games, thrillers and radio plays.

Prompt'u düzenleyin
Hint that the team has lost contact

Basit fiyatlandırma

Bugün ücretsiz başlayın, istediğiniz zaman yükseltme veya iptal etme seçeneğiyle.

Basic

$19/ ay
şu şekilde faturalandırılır $0 yıl başına

2400 aylık kredi

1 yalnızca kullanıcı

Tüm modeller

Workflows

Standard

$24/ ay
şu şekilde faturalandırılır $0 yıl başına

3625 aylık kredi

1 yalnızca kullanıcı

Tüm modeller

Workflows

Pro

$45/ ay
şu şekilde faturalandırılır $0 yıl başına

6350 paylaşılan aylık kredi

1 kullanıcı

+ en fazla 4 ek ücret karşılığında daha fazlası

Tüm modeller

Workflows

Max

$170/ ay
şu şekilde faturalandırılır $0 yıl başına

24650 paylaşılan aylık kredi

1 kullanıcı

+ en fazla 9 ek ücret karşılığında daha fazlası

Tüm modeller

Workflows

Enterprise

Daha yüksek limitler için

Özel

fiyatlandırma ve faturalandırma koşulları

Yüksek hacimli krediler
Özel koltuk limitleri
Tüm modeller
Workflows
Pricing Gradient

Free

Denemek için

$0

kalıcı olarak ücretsiz

En fazla 20 kredi
Yalnızca 1 kullanıcı
Sınırlı modeller
Workflows

SSS

What is a communications sound effect?
Communications sound effects are the non-verbal tones around a transmission: chirps that open and close a message, beeps as a link connects, squelch tails, data bursts and the sound of a signal dropping. They tell the audience a message is being sent or lost.
Where can I get communications sounds for a video?
Use Morphic to generate them from a short description of the transmission. That is quicker than pulling apart radio recordings to remove voices, and the tones are clean. Every sound on this page was made from the prompt printed beside it.
How do I make a custom communications sound effect?
Pick the moment in the message, the tone and the count, then generate it. A prompt like "a comms link connecting, a quick run of rising digital beeps, a burst of static" gives Morphic a clear sequence, and you can make it more analog or more digital.
What is the difference between a transmission chirp, a squelch and radio static?
A transmission chirp is a short clean tone that marks the start or end of a message. A squelch is the burst of noise and click when a two-way radio stops sending. Radio static is the steady hiss of an untuned or weak signal underneath everything else.
Can I use these communications sounds commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Because each sound is generated for you, you also avoid the clip turning up in someone else's video.
Why does my communications sound not sit right in the edit?
Comms tones should frame the dialogue, so they jar when they overlap it. Put the opening chirp just before the first word and the closing chirp or squelch just after the last, and band-limit the voice so it sounds like it came through the same radio.