Skateboard

Every skateboard sound an edit needs, ready to play: rolling wheels, the pop of an ollie, a landing slam, and a rail grind. Describe the one your shot is missing and Morphic generates it in seconds.

  • Match the wheel noise to the surface, smooth concrete, rough asphalt, or a board rattling over sidewalk seams.
  • A board that sounds like your board, instead of the same skate recording trailing through every other edit.
  • Clean stereo takes that sit under dialogue or carry a whole park sequence on their own.
The underside of a skateboard tilted in warm low light against a dark ground, one wheel spinning mid-trick

Skateboard sounds for animation, games, and video edits

Rolling

A continuous urethane hum over pavement, the bed you lay under everything else while a skater is simply moving.

Ollie pop

The sharp tail crack that starts a trick; place it exactly where the board leaves the ground and the jump feels intentional.

Landing slam

Wheels and body weight arriving at once, heavy enough to make a big drop hurt on screen.

Rail grind

Metal-on-metal scraping with a rising edge, for the middle of a trick where a single hit would end too soon.

Cracks in the path

Rhythmic ticks as wheels cross sidewalk seams, the detail that makes a long roll feel like a real street rather than a treadmill.

Kickflip

Flick, spin and catch in one gesture, the board rotating audibly before it settles back underfoot.

Generate a skateboard sound from a prompt

Bir başlangıç noktası seçin, dilediğiniz gibi düzenleyin ve Morphic'te oluşturun.

Oluştur

Ways to use skateboard sound effects

Land the trick on the frame it happens

The pop of the tail and the slap of the landing give a trick real weight, in a short film, a phone edit or a sports game replay.

Prompt'u düzenleyin
Land the trick on the frame it happens

When a park montage has no music yet

Long rolling wheels carry the quiet stretches between tricks, so a montage or a podcast intro has motion before any music arrives.

Prompt'u düzenleyin
When a park montage has no music yet

An empty concrete bowl at dusk

Wheels echoing off concrete walls, with distant scrapes and chatter, place a listener in a skatepark before anyone in frame speaks.

Prompt'u düzenleyin
An empty concrete bowl at dusk

Someone rolling past just off camera

A board rattling past the edge of the shot suggests a whole street of skaters, handy in radio drama, animation and open-world ambience.

Prompt'u düzenleyin
Someone rolling past just off camera

Basit fiyatlandırma

Bugün ücretsiz başlayın, istediğiniz zaman yükseltme veya iptal etme seçeneğiyle.

Basic

$9/ ay
şu şekilde faturalandırılır $0 yıl başına

900 aylık kredi

1 yalnızca kullanıcı

Tüm modeller

Workflows

Standard

$24/ ay
şu şekilde faturalandırılır $0 yıl başına

3200 aylık kredi

1 yalnızca kullanıcı

Tüm modeller

Workflows

Pro

$45/ ay
şu şekilde faturalandırılır $0 yıl başına

6200 paylaşılan aylık kredi

1 kullanıcı

+ en fazla 4 ek ücret karşılığında daha fazlası

Tüm modeller

Workflows

Pro Max

$170/ ay
şu şekilde faturalandırılır $0 yıl başına

24000 paylaşılan aylık kredi

1 kullanıcı

+ en fazla 9 ek ücret karşılığında daha fazlası

Tüm modeller

Workflows

Enterprise

Daha yüksek limitler için

Özel

fiyatlandırma ve faturalandırma koşulları

Yüksek hacimli krediler
Özel koltuk limitleri
Tüm modeller
Workflows
Pricing Gradient

Free

Denemek için

$0

kalıcı olarak ücretsiz

En fazla 20 kredi
Yalnızca 1 kullanıcı
Sınırlı modeller
Workflows

SSS

What is a skateboard sound effect?
It is any of the sounds a skateboard makes on screen: wheels rumbling on pavement, the pop of an ollie, a deck slamming on a landing, trucks grinding a rail, or the whir of a kickflip. Each one carries a different part of a trick, so the sound you pick tells the audience what the rider just did.
Where can I get skateboard sounds for a video?
Generate them rather than search for them. Describing the sound you want takes less time than digging through a stock library, and you get the specific take your scene needs instead of the closest available match. Every sound on this page was made from the prompt printed beside it, so you can start from one and adjust it.
How do I make a custom skateboard sound effect?
Describe the trick or the surface, the impact, and the speed, then generate it. A prompt like "a sharp tail pop, a short scrape, then a deck slap" gives Morphic enough to work with, and you can adjust the wording until it matches the trick in your shot.
How do I make an ollie sound different from a plain jump?
Name the three events an ollie actually makes: the tail cracking on the ground, the short scrape as the deck slides up the foot, then the slap of the landing. A plain jump has only the launch and the land; it is that middle crack-and-scrape that reads as a real ollie rather than a board dropping.
Can I use these skateboard sounds commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Because each sound is generated rather than pulled from a shared library, you also avoid the clip turning up in someone else's video.
Why does my skateboard sound not sit right in the edit?
Usually the surface or the speed is wrong rather than the sound itself. A smooth, quiet roll laid under a shot of rough concrete feels pasted on, because the ear expects the grit to match the ground. Name the surface and the pace when you generate it, and the result settles into the scene with far less mixing.