Rowboat

Oars knocking in their oarlocks, blades pulling through water, a wooden hull bumping the dock and the bow crunching onto pebbles. Describe the rowboat you need and Morphic generates it clean.

  • Steady rowing, one hard stroke, oars dropped in the hull or the bow grinding onto pebbles
  • Strokes timed to your dawn crossing on a still lake
  • Clean, isolated rowboat audio you download and drop under the oars in your edit
A wooden oar blade lifting out of dark water beside a rowboat hull under warm side light against a cold dark ground, drops spraying from the blade

Rowboat sounds for games, animation, and video edits

Steady rowing

Oars knocking in their oarlocks and dipping in an even rhythm, the bed for any crossing on a lake or river.

Single hard stroke

One strong pull with a deep dip and a swirl, for a close shot of the blade or a push away from danger.

Oars shipped

Oars lifted out and dropped into the hull with hollow knocks, the sound of a rower stopping to rest or listen.

Bumping the dock

A wooden hull knocking twice against the posts, the arrival at a jetty or a boat left tied up and drifting.

Beaching on pebbles

The bow grinding up onto stones, the end of a crossing or the landing on an island no one visits.

Drifting glide

Oars raised and dripping as the boat slides on, the still moment after the rowing stops and someone looks around.

Generate a rowboat sound from a prompt

اختر نقطة بداية، وعدّل ما تشاء، ثم أنشئه في Morphic.

أنشئ

Ways to use a rowboat sound effect

Land the moment the boat reaches the shore

The bow crunching onto pebbles hits the exact frame of arrival, in an adventure film, an island game or an animated short.

تعديل الأمر النصي
Land the moment the boat reaches the shore

Let a drifting boat hold a still shot

Drips from raised oars and water along the hull carry a long, wordless shot on a lake, in a film, a game or a podcast interlude.

تعديل الأمر النصي
Let a drifting boat hold a still shot

Put the audience out on open water

Oars knocking in a steady stroke say lake, river and distance from anyone before a line is spoken, in a documentary or an audio drama.

تعديل الأمر النصي
Put the audience out on open water

Hint that someone has just tied up at the jetty

A hull knocking against the posts off screen tells viewers a visitor has arrived, so a mystery or a game never shows the boat.

تعديل الأمر النصي
Hint that someone has just tied up at the jetty

أسعار بسيطة

ابدأ مجاناً اليوم، مع إمكانية الترقية أو الإلغاء في أي وقت.

Basic

$19/ شهر
تُفوتر باعتبارها $0 سنوياً

2400 شهرياً أرصدة

1 مستخدم فقط

جميع النماذج

Workflows

Standard

$24/ شهر
تُفوتر باعتبارها $0 سنوياً

3625 شهرياً أرصدة

1 مستخدم فقط

جميع النماذج

Workflows

Pro

$45/ شهر
تُفوتر باعتبارها $0 سنوياً

6350 مشترك شهرياً أرصدة

1 مستخدم

+ حتى 4 المزيد بتكلفة إضافية

جميع النماذج

Workflows

Max

$170/ شهر
تُفوتر باعتبارها $0 سنوياً

24650 مشترك شهرياً أرصدة

1 مستخدم

+ حتى 9 المزيد بتكلفة إضافية

جميع النماذج

Workflows

Enterprise

لحدود أعلى

مخصص

شروط الأسعار والفوترة

أرصدة كبيرة الحجم
حدود مقاعد مخصصة
جميع النماذج
Workflows
Pricing Gradient

Free

للتجربة والاستكشاف

$0

مجاني إلى الأبد

حتى 20 رصيد
مستخدم واحد فقط
نماذج محدودة
Workflows

الأسئلة الشائعة

What is a rowboat sound effect?
It is the sound of a small boat moved by oars: blades dipping and pulling through water, oars knocking in their oarlocks, drips between strokes and the wooden hull meeting a dock or a shore. It puts a quiet, human-powered crossing into a scene.
Where can I get rowboat sounds for a video?
Generate them from a prompt. Describing the rowboat sound you want takes less time than digging through a stock library, and you get the exact stroke and hull sound your scene needs. Every sound on this page was made from the prompt printed beside it, so you can start from one and adjust it.
How do I make a custom rowboat sound effect?
Describe the boat, what the oars are doing and what the hull meets, then generate it. A prompt like "a wooden rowboat being rowed, oars knocking in metal oarlocks and dipping into water" gives Morphic enough to work with, and you can adjust the wording until it fits the shot.
What is the difference between a rowboat, a canoe and a motorboat sound?
A rowboat has oars fixed in oarlocks, so each stroke comes with a wooden or metal knock as well as the dip. A canoe is paddled by hand with no oarlocks, so you hear only the paddle in the water. A motorboat is dominated by the engine, with the water pushed into the background.
Can I use these rowboat sounds commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Because each sound is generated for you, you also avoid the clip turning up in someone else's video.
Why does my rowboat sound not sit right in the edit?
Usually the strokes do not match the oars on screen. Each dip should land when the blade enters the water, and the knock when the oar turns in its lock. Match the stroke rate to the rower in the shot, and drop the rowing entirely when the oars are raised.