Radio Static

The broadband hiss and crackle of a signal that will not lock in, ready to play. Describe the static your scene needs, from a flat untuned wash to a harsh burst, and Morphic generates it in seconds.

  • Pick the era and the fault, thin shortwave whine, warm valve-set hiss, or reception cutting in and out
  • Static captured for your story rather than the hiss bed circulating through every found-footage short
  • Delivered as clean stereo you can push far under dialogue or bring right up front
A vintage radio tuning dial lit from one warm side against a dark ground, the needle caught mid-sweep between two stations

Radio static for video, games, and animation

Untuned hiss

Flat, even noise between stations, the steady bed you park under a scene and then forget about.

AM crackle

Warmer, pop-flecked interference with the roundness of an old valve set, ideal for period rooms.

Signal dropout

The abrupt swallow of a voice as reception fails, then nothing: perfect for a call that ends badly.

Tuning sweep

A dial dragged across the band, voices and tones smearing past before settling somewhere half-clear.

Shortwave warble

A pitched, drifting whine that never quite locks on, suggesting distance and a transmitter out of reach.

Static burst

One short, violent surge of noise you can land on a cut for a jolt rather than a wash.

Generate a radio static sound from a prompt

Bir başlangıç noktası seçin, dilediğiniz gibi düzenleyin ve Morphic'te oluşturun.

Oluştur

Ways to use a radio static sound effect

Snap the moment a signal dies

A hard burst of hiss marks the second contact is lost. Cut it into a thriller, a survival game or an audio drama right where the line drops out.

Prompt'u düzenleyin
Snap the moment a signal dies

When a silent scene needs unease

Low hiss under an empty room builds dread with nothing on screen. It works in horror shorts, audio fiction and slow scenes that want texture, not music.

Prompt'u düzenleyin
When a silent scene needs unease

A bunker, a patrol car, a 1940s living room

Crackle from a speaker instantly dates and places a room, wartime kitchen, roadside motel. Layer it low behind dialogue in film or games.

Prompt'u düzenleyin
A bunker, a patrol car, a 1940s living room

Hint at a voice trying to get through

A warbling shortwave signal suggests someone far away, still transmitting. Good for animation, radio plays and any story about a search for survivors.

Prompt'u düzenleyin
Hint at a voice trying to get through

Basit fiyatlandırma

Bugün ücretsiz başlayın, istediğiniz zaman yükseltme veya iptal etme seçeneğiyle.

Basic

$9/ ay
şu şekilde faturalandırılır $0 yıl başına

900 aylık kredi

1 yalnızca kullanıcı

Tüm modeller

Workflows

Standard

$24/ ay
şu şekilde faturalandırılır $0 yıl başına

3200 aylık kredi

1 yalnızca kullanıcı

Tüm modeller

Workflows

Pro

$45/ ay
şu şekilde faturalandırılır $0 yıl başına

6200 paylaşılan aylık kredi

1 kullanıcı

+ en fazla 4 ek ücret karşılığında daha fazlası

Tüm modeller

Workflows

Pro Max

$170/ ay
şu şekilde faturalandırılır $0 yıl başına

24000 paylaşılan aylık kredi

1 kullanıcı

+ en fazla 9 ek ücret karşılığında daha fazlası

Tüm modeller

Workflows

Enterprise

Daha yüksek limitler için

Özel

fiyatlandırma ve faturalandırma koşulları

Yüksek hacimli krediler
Özel koltuk limitleri
Tüm modeller
Workflows
Pricing Gradient

Free

Denemek için

$0

kalıcı olarak ücretsiz

En fazla 20 kredi
Yalnızca 1 kullanıcı
Sınırlı modeller
Workflows

SSS

What is the radio static sound effect?
It is the broadband hiss and crackle a radio makes when it is not locked onto a station, made up of random noise across the frequency band with no signal underneath it. On screen it reads instantly as a dead channel, a weak signal, or old technology, which is why it turns up so often in film, games, and animation.
Where can I get radio static for a video?
Generate it rather than search for it. Describing the static you want takes less time than digging through a stock library, and you get the exact texture your scene needs instead of the closest available clip. Every sound on this page was made from the prompt printed beside it, so you can start from one and adjust it.
How do I make a custom radio static sound effect?
Describe the band, the texture, and whether the signal holds steady or moves, then generate it. A prompt like "a flat broadband hiss with faint high sizzle, unbroken" gives Morphic enough to work with, and you can adjust the wording until it matches the set on screen.
What is the difference between AM and FM static?
FM static is a flatter, hissier wash, closer to clean white noise, because the signal drops out more abruptly. AM static is rougher, with sharp crackles and pops riding on the hiss, since it picks up electrical interference more easily. Choosing the wrong one is a common reason static feels off against an old set or a modern tuner.
Can I use these radio static sounds commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Because each sound is generated rather than pulled from a shared library, you also avoid the clip turning up in someone else's video.
Why does my radio static not sit right in the edit?
Usually it is level and movement rather than the sound itself. A flat static bed laid at full volume swamps everything above it, and a static that never changes reads as a synth pad rather than a live signal. Pull it down under the dialogue and pick a take that swells or drops, and it settles into the scene.