Lever

A heavy iron lever pulled down with a solid clunk, a rusty lever grinding through its arc and a trapdoor springing open. Describe the lever sound your scene needs and Morphic generates it clean.

  • A heavy clunk, a rusty grind or a quick toggle, made the way you describe it
  • Timed to the hidden door in your puzzle level as it grinds open
  • Clean, isolated audio to drop on the pull, the lock or the trap
A tall iron lever in a notched iron quadrant mid-pull under warm side light against a near black ground, sparks and flakes of rust flying from the notches

Lever sounds for games, animation, and video edits

Heavy lever clunk

One stiff pull and a deep locking clunk, for opening a gate, switching on power or starting a big machine.

Rusty lever grind

A slow scraping squeal through the whole arc, for a forgotten mechanism, a dungeon puzzle or an old factory.

Throttle lever

A quick run of ratchet clicks as a lever moves through its notches, for engines, boats, trains and control rooms.

Railway point lever

A long heave, a heavy clank and rods rattling along the track, for a rail yard, a mine cart chase or a western.

Trapdoor lever

A wooden lever yanked and a trapdoor falling open, for a castle trap, a stage trick or a villain dropping a hero.

Toggle lever

A small lever flicked up and down with a sharp click, for switching on a lamp, a radio or a control panel.

Generate a lever sound from a prompt

Pilih titik awal, ubah sesukamu, lalu buat di Morphic.

Buat

Ways to use a lever sound effect

Land the moment the trap is sprung

A trapdoor lever and thud on the frame the floor gives way makes the drop hit hard, in a short film, an adventure game or an animated short.

Edit prompt
Land the moment the trap is sprung

Hold a tense puzzle room with no music

A slow rusty grind fills the wait while a door creeps open, keeping a game level, an escape room video or an audio drama tense.

Edit prompt
Hold a tense puzzle room with no music

Put the viewer in an old railway yard

A point lever heaved and rods rattling tell the audience where they are before a train appears, in video, animation and games.

Edit prompt
Put the viewer in an old railway yard

Hint that a machine has been switched on

Throttle clicks from out of frame suggest an engine is being pushed up to power, useful in thriller video, sci-fi games and audio drama.

Edit prompt
Hint that a machine has been switched on

Harga sederhana

Mulai gratis hari ini, dengan opsi untuk upgrade atau membatalkan kapan saja.

Basic

$19/ bulan
ditagih sebagai $0 per tahun

2400 bulanan kredit

1 pengguna saja

Semua model

Workflows

Standard

$24/ bulan
ditagih sebagai $0 per tahun

3625 bulanan kredit

1 pengguna saja

Semua model

Workflows

Pro

$45/ bulan
ditagih sebagai $0 per tahun

6350 bersama bulanan kredit

1 pengguna

+ hingga 4 lainnya dengan biaya tambahan

Semua model

Workflows

Max

$170/ bulan
ditagih sebagai $0 per tahun

24650 bersama bulanan kredit

1 pengguna

+ hingga 9 lainnya dengan biaya tambahan

Semua model

Workflows

Enterprise

Untuk batas yang lebih tinggi

Khusus

ketentuan harga dan penagihan

Kredit volume tinggi
Batas kursi khusus
Semua model
Workflows
Pricing Gradient

Free

Untuk bereksperimen

$0

gratis selamanya

Hingga 20 kredit
Hanya 1 pengguna
Model terbatas
Workflows

FAQ

What is a lever sound effect?
It is the sound of a bar pulled or pushed on a pivot: a grind through its arc and a clunk where it stops or locks. Size and material decide the result, from a heavy iron castle lever to a small metal toggle.
Where can I get lever sounds for a video?
Generate them from a prompt. Describing the pull you want takes less time than digging through a stock library, and every sound on this page was made from the prompt printed beside it, so you can start from one and adjust it.
How do I make a custom lever sound effect?
Name the lever, its material and what happens at the end of the pull, then generate it. A prompt like "a heavy iron lever pulled down hard, a stiff metal grind then a deep solid clunk" gives Morphic enough to work with.
What is the difference between a lever, a latch and a switch sound?
A lever sound has movement through an arc, a grind or ratchet, then a stop. A latch is a bolt or catch closing on a door, and a switch is a short click with almost no travel. If a character pulls a bar, use the lever.
Can I use these lever sounds commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Because each sound is generated for you, you also avoid the clip turning up in someone else's video.
Why does my lever sound not sit right in the edit?
Usually the clunk does not land when the lever stops on screen. Line up the end of the pull with the final frame of the motion, and pick a heavier or lighter lever so the weight matches what you see.