Break a calm moment with one beep
A single chirp lands on the frame and stops, so a quiet shot turns without anything else changing. It works in a game interior or an animated short as readily as live action.
Edit prompt
Smoke detector sound effect
The chirp that wakes a house at 3am, and the horn pattern behind it. Ask for the exact beep, the spacing, and how harsh it sits against dialogue.
- Ask for the chirp, the blast pattern, and how many beeps land
- A unit that sounds like the one in your scene, not the clip everyone reuses
- Clean, dry audio that sits under speech without swallowing it
Detector beeps and alarm patterns for any edit
Low battery chirp
One piercing beep with nothing after it, on its own. This is the take most edits want, because the chirp is the sound everybody recognises before anyone explains what it is.
Test button blast
Three hard blasts then silence, the pattern a unit makes when somebody presses it deliberately. It reads as a check rather than an emergency, which is a different scene entirely.
Full alarm pattern
Groups of three repeating with a pause between them, running long enough to lay under a whole shot. The pause is what makes it read as an alarm and not a continuous tone.
Dulled alarm
The same pattern with the top gone off it and a small echo trailing behind. That colour change is what tells an audience the alarm is somewhere other than where the camera is.
End of life double chirp
Two clipped beeps close together instead of one. The doubling is the detail that separates a unit asking for a battery from a unit asking to be replaced.
Alarm cutting out
A blast stopped dead partway through by a soft acknowledgement beep. Useful when the point of the moment is somebody silencing the thing rather than the alarm itself.
Generate a detector beep from a prompt
Pilih titik awal, ubah sesukamu, lalu buat di Morphic.
Ways to use a smoke detector sound effect
Hold a wordless stretch without adding music
The repeating pattern runs long enough to carry a held shot on its own, and gives an edit a rhythm to cut against in a podcast segment or a cutscene.
Edit prompt
Tell the audience nobody has fixed anything
A double chirp repeating in a scene says more about a household than a line of dialogue could. It reads as neglect, poverty or exhaustion depending on what is around it.
Edit prompt
Suggest a fire you never put on screen
A dulled alarm with an echo behind it places trouble beyond the frame, so a game level or an animated sequence gets an emergency it never has to render.
Edit prompt
Anda mungkin juga suka
Air conditioner sound effects
Air conditioner sound effects for room tone: steady hums, a compressor kicking on, window-unit rattle and the fan winding down after it shuts off.
Alarm clock sound effects
Alarm clock sound effects for waking scenes: twin-bell ringing, digital beeps, a gentle chime, phone buzz on wood and the slap that kills the snooze.
Alarm sound effects
Generate alarm sound effects with Morphic. Set the material, room, and distance you need for a clean, believable take.
Bell sound effects
Morphic builds bell sound effects from a prompt. Choose the space and weight so the sound sits naturally against the picture.
Efek suara lainnya di Household & objects
Harga sederhana
Mulai gratis hari ini, dengan opsi untuk upgrade atau membatalkan kapan saja.
Basic
$19/ bulan
ditagih sebagai $0 per tahun2400 bulanan kredit
1 pengguna saja
Semua model
Workflows
Standard
$24/ bulan
ditagih sebagai $0 per tahun3625 bulanan kredit
1 pengguna saja
Semua model
Workflows
Pro
$45/ bulan
ditagih sebagai $0 per tahun6350 bersama bulanan kredit
1 pengguna
+ hingga 4 lainnya dengan biaya tambahan
Semua model
Workflows
Max
$170/ bulan
ditagih sebagai $0 per tahun24650 bersama bulanan kredit
1 pengguna
+ hingga 9 lainnya dengan biaya tambahan
Semua model
Workflows
Enterprise
Untuk batas yang lebih tinggi
Khusus
ketentuan harga dan penagihan
Kredit volume tinggi
Batas kursi khusus
Semua model
Workflows
Free
Untuk bereksperimen
$0
gratis selamanya
Hingga 20 kredit
Hanya 1 pengguna
Model terbatas
Workflows
FAQ
What does a smoke detector sound effect need to sound like?
A narrow, piercing electronic tone with a hard front edge and almost no tail. Everything recognisable about it is in the spacing rather than the tone itself: one chirp reads as a battery, three blasts read as an alarm, and two close together read as a unit at the end of its life.
How do I make a smoke detector sound effect?
Describe the beep and then the pattern. Say how sharp the attack is, how high and narrow the tone sits, how many beeps arrive together, and how long the silence between groups runs. The pattern is what an audience actually reads.
Why does my alarm come back sounding like a car reversing?
Because the tone was described without the pitch. Reversing beepers sit much lower and softer, so ask explicitly for a piercing high tone with a hard attack and no tail, and the result moves into detector territory straight away.
How do I make the alarm sound like it is in another part of the building?
Change the colour rather than the volume. Ask for the high edge to be gone, the tone dulled, and a faint short echo behind each blast. Turning a bright take down just makes a quiet bright alarm, which never reads as distance.
How do I stop the beeps fighting with dialogue?
Use the dulled version under speech and save the piercing one for gaps between lines. A detector tone sits in the same band as consonants, so the bright take will mask words wherever you put it.
Can I use a generated smoke detector sound commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Generating the beep also means the pattern in your scene matches the unit you put on screen, rather than whatever a stock upload happened to record.