Swoosh sound effect

The rush of air that carries one shot into the next. Describe how fast it moves, how much weight is behind it, and how long the tail rings on after the cut.

  • Ask for the speed, the weight of air, and how long the tail rings
  • A pass built for your cut instead of the whoosh in every transition pack
  • Clean audio with the top end intact, ready to sit across an edit point
A thin cane whipping through a shaft of hard light, the air behind it smeared into a curved streak of drifting dust

Swoosh variations for cuts, titles, and motion graphics

Fast whip pass

A thin, bright pass with almost no body behind it. This is the version most edits reach for, because it reads as movement without adding any weight the picture has to justify.

Rising build

Air that thickens and climbs for several seconds before stopping dead. Lay the stop on the cut and everything before it becomes anticipation.

Reverse pull

The movement runs inward rather than past, arriving instead of leaving. Useful when the next shot is the destination and the transition should feel like being drawn into it.

Heavy pass

Thick and low, with the rounded front a large object makes. Reach for it when something with mass is moving on screen and a thin whip would read as too small for it.

Cloth swipe

Dry fabric dragged across itself, closer to friction than to air. It sits under dialogue where a bright whip would jump out, so it suits lower-key transitions and menu movement.

Pass with a ringing tail

The same fast front, but the thin end of it keeps ringing for seconds afterwards. The tail crosses the edit point, which is what makes two unrelated shots feel joined.

Generate a swoosh sound from a prompt

Pilih titik awal, ubah sesukamu, lalu buat di Morphic.

Buat

Ways to use a swoosh sound effect

Mark the frame where one shot becomes another

A short bright pass placed on the cut tells the audience the change was deliberate. It does the same job in a game menu or a motion graphic as it does on picture.

Edit prompt
Mark the frame where one shot becomes another

Bridge two shots when there is no music yet

A tail that keeps ringing after the cut holds the gap open on its own. That covers a rough assembly, an animatic, or a podcast video before any track exists.

Edit prompt
Bridge two shots when there is no music yet

Give a title card a sense of speed

A build that climbs and then stops sets the pace before a single word is read. Titles, level intros, and channel idents all carry more energy for it.

Edit prompt
Give a title card a sense of speed

Suggest something flying past outside the frame

A heavy pass with a long tail puts an object in motion that the camera never catches. In animation or a game it saves modelling the thing at all.

Edit prompt
Suggest something flying past outside the frame

Harga sederhana

Mulai gratis hari ini, dengan opsi untuk upgrade atau membatalkan kapan saja.

Basic

$9/ bulan
ditagih sebagai $0 per tahun

900 bulanan kredit

1 pengguna saja

Semua model

Workflows

Standard

$24/ bulan
ditagih sebagai $0 per tahun

3200 bulanan kredit

1 pengguna saja

Semua model

Workflows

Pro

$45/ bulan
ditagih sebagai $0 per tahun

6200 bersama bulanan kredit

1 pengguna

+ hingga 4 lainnya dengan biaya tambahan

Semua model

Workflows

Pro Max

$170/ bulan
ditagih sebagai $0 per tahun

24000 bersama bulanan kredit

1 pengguna

+ hingga 9 lainnya dengan biaya tambahan

Semua model

Workflows

Enterprise

Untuk batas yang lebih tinggi

Khusus

ketentuan harga dan penagihan

Kredit volume tinggi
Batas kursi khusus
Semua model
Workflows
Pricing Gradient

Free

Untuk bereksperimen

$0

gratis selamanya

Hingga 20 kredit
Hanya 1 pengguna
Model terbatas
Workflows

FAQ

What is a swoosh sound effect used for?
It marks a change of shot, screen, or idea. The rush of air gives the audience a moment of movement to travel across, which is why it turns up on cuts, title cards, menu transitions, and lower thirds in almost every kind of video.
How do I make a swoosh sound effect from a text prompt?
Describe the air rather than naming the effect. Say what is moving through it, how fast, whether it passes you or comes towards you, and how long it takes to fade. Those four details produce a different pass every time, where the word swoosh on its own produces the same one.
How long should a transition swoosh be?
Around one and a half to two seconds for a straight cut, and four to six for anything that builds. Generate the longer version when in doubt, since trimming the front of a pass in the timeline is easy and adding tail that was never recorded is not.
Why does my swoosh sound thin next to the picture?
Because a thin whip carries no low end, and a large object on screen needs some. Ask for air displaced by something heavy, with a rounded front rather than a sharp one, and the same movement suddenly matches the mass in the shot.
How do I line a swoosh up with the cut?
Put the loudest part of the pass on the edit point rather than the start of the file. Most of a swoosh is approach, so aligning the file start with the cut leaves the movement arriving late by a third of a second, which reads as a mistake.
Can I use a generated swoosh sound commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. For transitions this matters more than it looks, since a swoosh recurs dozens of times in a single edit and any licence question multiplies with it.