Light bulb

The crackling buzz of a flickering bulb, the ping and pop of a filament burning out, and the ticking start of a fluorescent tube. Describe the light bulb your scene needs and Morphic generates it clean.

  • Ask for a flickering buzz, a filament popping or a tube ticking to life
  • A flicker made for the parking garage stairwell in your thriller
  • Clean bulb audio with no room hum, ready to cut to each flicker
A bare clear glass light bulb hanging at an angle, its filament flaring bright orange with a tiny spark inside against a cold dark ground

Light bulb sounds for film, games, and animation

Flickering buzz

A crackling hum that cuts in and out, the go-to sound for a failing light in a tense or neglected scene.

Burning out

A ping and a sharp pop as the filament gives way, the moment a room goes dark without anyone touching a switch.

Tube starting up

Quick ticks and flickers before a steady hum, for overhead lights coming on in a garage, an office or a corridor.

Screwed in

Dry squeaky twists of glass in a metal socket and a small click, the hands-on sound of changing a bulb.

Bulb shattering

A thin bright smash with tiny shards skittering away, for a dropped bulb, a struggle or a sudden accident.

Steady filament hum

A faint even hum with a fine whine under it, a quiet bed for a bare bulb hanging over a table or a stairwell.

Generate a light bulb sound from a prompt

Bir başlangıç noktası seçin, dilediğiniz gibi düzenleyin ve Morphic'te oluşturun.

Oluştur

Ways to use a light bulb sound effect

Hit the moment the lights die

A filament popping on the exact frame the room goes black gives a horror scene, a game level or an animated short its jolt.

Prompt'u düzenleyin
Hit the moment the lights die

Hold a tense quiet scene with no music

A faint bulb hum under a long silence keeps an interrogation, a confession or a podcast drama from sounding empty.

Prompt'u düzenleyin
Hold a tense quiet scene with no music

Set up a run-down garage or basement

A tube light ticking to life tells viewers where they are and how neglected it is, in a film, a game or an audio story.

Prompt'u düzenleyin
Set up a run-down garage or basement

Hint that the power is failing somewhere unseen

A flickering buzz from off camera says the building is not safe, so your thriller or game can build dread before anything shows up.

Prompt'u düzenleyin
Hint that the power is failing somewhere unseen

Basit fiyatlandırma

Bugün ücretsiz başlayın, istediğiniz zaman yükseltme veya iptal etme seçeneğiyle.

Basic

$19/ ay
şu şekilde faturalandırılır $0 yıl başına

2400 aylık kredi

1 yalnızca kullanıcı

Tüm modeller

Workflows

Standard

$24/ ay
şu şekilde faturalandırılır $0 yıl başına

3625 aylık kredi

1 yalnızca kullanıcı

Tüm modeller

Workflows

Pro

$45/ ay
şu şekilde faturalandırılır $0 yıl başına

6350 paylaşılan aylık kredi

1 kullanıcı

+ en fazla 4 ek ücret karşılığında daha fazlası

Tüm modeller

Workflows

Max

$170/ ay
şu şekilde faturalandırılır $0 yıl başına

24650 paylaşılan aylık kredi

1 kullanıcı

+ en fazla 9 ek ücret karşılığında daha fazlası

Tüm modeller

Workflows

Enterprise

Daha yüksek limitler için

Özel

fiyatlandırma ve faturalandırma koşulları

Yüksek hacimli krediler
Özel koltuk limitleri
Tüm modeller
Workflows
Pricing Gradient

Free

Denemek için

$0

kalıcı olarak ücretsiz

En fazla 20 kredi
Yalnızca 1 kullanıcı
Sınırlı modeller
Workflows

SSS

What is a light bulb sound effect?
It is the sound a bulb or tube light makes itself, such as a buzzing flicker, a filament burning out, a fluorescent tube starting up or a bulb breaking. These sounds tell the audience about the state of the power and the place, often before they notice the light changing.
Where can I get light bulb sounds for a video?
Generate them. Describing the bulb and the moment takes less time than digging through a stock library, and you get a sound that matches the light on screen. Every sound on this page was made from the prompt printed beside it, so you can start from one and adjust it.
How do I make a custom light bulb sound effect?
Describe the type of bulb and what happens to it, then generate it. A prompt like "a light bulb buzzing and flickering, a crackling electrical hum that stutters on and off" gives Morphic enough to work with, and you can adjust the wording until it fits.
What is the difference between a flicker, a burnout and a fluorescent start?
A flicker is a bad contact, a crackling buzz that cuts in and out over time. A burnout is a single event, a ping and a pop as the filament breaks and the light dies. A fluorescent start is a tube striking, a few ticks and flashes that settle into a steady hum.
Can I use these light bulb sounds commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Because each sound is generated for you, you also avoid the clip turning up in someone else's video.
Why does my light bulb sound not sit right in the edit?
Usually the buzz does not follow the flicker on screen. When the light dims and the sound stays steady, the ear catches it at once. Cut the buzz so each stutter lands with a visible flicker, and keep the hum quiet enough that it sits under any dialogue.