Snap the cut to the second the blade bites
One throttle surge on the frame the teeth meet timber makes a felling shot hit hard, in a documentary, a trailer or a survival game.
Editar prompt
Chainsaw
The sputtering idle, the throttle scream, and the tearing bite into wood that make a chainsaw the loudest threat in a horror scene. Describe the chainsaw your edit needs and Morphic generates it clean, from a lazy idle to a full-throttle rev.
- Say which saw and which moment, cold start, ragged idle, deep bite into hardwood, and that is the take you get.
- An engine recorded for your scene alone, rather than the raspy rev doing service in every slasher trailer.
- Arrives with the motor up front and no crew voices behind it, so it holds up on headphones.
Chainsaw sounds for games, animation, and video edits
Rough idle
The uneven chug of a saw ticking over between cuts, the pause where a character decides what happens next.
Full-throttle rev
Wide-open engine screaming with nothing in the chain, pure aggression for a threat or a peak moment.
Pull-start
Cord yanks, a cough, then the catch, a three-beat build that makes everyone wait for the engine to take.
Cutting into wood
The load pulling the motor down as teeth chew through a trunk, the take for when real work is happening.
Rev bursts
Short stabs of throttle in a row, easy to cut against picture when you want rhythm rather than a continuous run.
Sputter and stall
The engine choking out into quiet, an ending in itself for the beat after a chase or the close of a working day.
Generate a chainsaw sound from a prompt
Elige un punto de partida, edita lo que quieras y genéralo en Morphic.
Ways to use a chainsaw sound effect
When a felling sequence runs without narration
Idle and rev bursts carry a long clearing montage where nobody speaks, keeping an explainer or a title sequence moving forward.
Editar prompt
A working woodlot heard from the treeline
Two-stroke noise drifting through trees establishes a logging camp before the camera arrives, useful in radio drama or level design.
Editar prompt
The saw you hear but never see
A pull-start echoing from behind a wall says exactly who is coming, and your horror scene never has to show him at all.
Editar prompt
También te puede gustar
Zombie sound effects
Play zombie sounds and generate the exact groan, snarl, or horde moan your scene needs, for video, games, and animation, built from your prompt.
Creaking door sound effects
Creaking door sound effects, slow swings, rusty hinge whines and a creak that ends in a slam. Generate the exact door your scene needs from a prompt.
Creepy sound effects
Generate creepy sound effects with Morphic. Shape the dread, the texture, and the timing so the scare lands exactly where you cut.
Crypt sound effects
Crypt sound effects, grinding stone, sarcophagus lids, iron locks and falling grit. Generate the exact underground tomb your scene needs from a prompt.
Más efectos de sonido en Horror & suspense
Precios simples
Comienza gratis hoy, con la opción de mejorar tu plan o cancelar cuando quieras.
Basic
$19/ mes
facturado como $0 por año2400 mensual créditos
1 usuario
Todos los modelos
Workflows
Standard
$24/ mes
facturado como $0 por año3625 mensual créditos
1 usuario
Todos los modelos
Workflows
Pro
$45/ mes
facturado como $0 por año6350 compartidos mensual créditos
1 usuario
+ hasta 4 más con costo adicional
Todos los modelos
Workflows
Max
$170/ mes
facturado como $0 por año24650 compartidos mensual créditos
1 usuario
+ hasta 9 más con costo adicional
Todos los modelos
Workflows
Enterprise
Para límites más altos
Personalizado
términos de precios y facturación
Créditos de alto volumen
Límites de asientos personalizados
Todos los modelos
Workflows
Free
Para experimentar
$0
gratis para siempre
Hasta 20 créditos
Solo 1 usuario
Modelos limitados
Workflows
Preguntas frecuentes
What is a chainsaw sound effect?
It is a recording of a gas-powered chainsaw at a specific state, idling, revving, cutting, or starting up, used to place the machine in a scene. Each state reads differently: a rough idle signals a waiting threat, a full rev signals an attack, and the tearing bite of the chain sells actual contact, so the moment you pick matters as much as the tool.
Where can I get chainsaw sounds for a video?
Generate them rather than search for them. Describing the take you want takes less time than digging through a stock library, and you get the exact engine state your scene needs instead of the closest available clip. Every sound on this page was made from the prompt printed beside it, so you can start from one and adjust it.
How do I make a custom chainsaw sound effect?
Describe the engine state and what it is doing, then generate it. A prompt like "a gas chainsaw revving to full throttle, the two-stroke engine climbing to a scream" gives Morphic enough to work with, and you can adjust the wording until it fits the shot.
What is the difference between an idle, a rev, and a cut?
An idle is the engine ticking over low and uneven, the sound of a chainsaw held ready; a rev is the throttle opened wide to a screaming whine, the sound of a threat; and a cut is the chain tearing through wood, where the engine bogs and pulls. Picking the wrong one is the most common reason a chainsaw feels off against picture, because each carries a different intent.
Can I use these chainsaw sounds commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Because each sound is generated rather than pulled from a shared library, you also avoid the clip turning up in someone else's video.
Why does my chainsaw sound not sit right in the edit?
Usually it is the engine state fighting the picture rather than the sound itself. A full-throttle rev laid under a shot of a saw sitting idle reads as pasted on, because the ear expects the sound to match what the machine is doing. Generate the state you actually see, idle, rev, or cut, and it sits in the scene with far less work.