Mark the moment something gives way
A splintering break followed by boards coming down puts the failure at one exact point. It works on a game destructible or an animated gag as much as on live action.
프롬프트 편집
Crash sound effect
Something heavy giving way. Name the materials, the surface they land on, and how long the pieces keep moving afterwards.
- Say what breaks, what it lands on, and how long the debris runs
- Your own break rather than the library smash already in a hundred edits
- Clean audio with the first hit and the settle both intact
Crash variations by material and weight
Debris collapse
One deep hit and then everything coming down after it. This is the version most edits want, because the settle is what tells an audience how much mass was involved.
Pane shatter
A pane going all at once, then the shards. The scatter after the crack lasts longer than people expect, and cutting it short is what makes a smash sound staged.
Wood splintering
Dry cracks tearing along the grain as boards give way. Reach for it when the break has to read as something failing under load rather than something struck.
Metal clatter
Pipes and sheet coming down with a long ringing decay behind them. Metal keeps sounding after it lands, which is what separates it from every other material here.
Ceramic smash
Plates going over and breaking. Small, brittle and domestic, so it reads as an accident in a kitchen rather than a building coming apart.
Dulled collapse
The same event with the top end taken off it and a short echo behind. Distance is a change of colour, not a change of level, and this is what that sounds like.
Generate a collision from a prompt
시작점을 고르고 원하는 대로 수정한 뒤 Morphic에서 생성하세요.
Ways to use a crash sound effect
Carry a wrecked scene with no music under it
Debris settling for four seconds holds a shot on its own. A podcast reconstruction or a comic-style animation gets the same mileage out of it as a drama does.
프롬프트 편집
Tell the audience how big the wreckage is
Ringing metal reads industrial and large, brittle ceramic reads small and domestic. The material chooses the scale of the scene before anyone sees it.
프롬프트 편집
Wreck something the camera never points at
A dulled rumble with a faint echo behind it puts a collapse well beyond the frame. Nothing has to be built, rigged or destroyed for the audience to believe it.
프롬프트 편집
이런 것도 좋아하실 거예요
Slap sound effect
Generate slap sound effects with Morphic. Set the weight, the material, and the size of the contact for a hit that lands in your mix.
Snap sound effect
Morphic creates snap sound effects from a text prompt. Choose the heft and texture your cut needs instead of layering three stock hits together.
Splat sound effect
Need a splat sound effect with real weight? Morphic generates it to your spec, so the impact sits right against the picture.
Stomp sound effects
Stomp sound effects: boots on concrete, marching lines, giant footfalls and crowd stomps for film trailers, animation, game design and percussive edits.
Impacts & action 효과음 더 보기
간단한 가격
오늘 무료로 시작하고 언제든지 업그레이드하거나 취소할 수 있습니다.
Basic
$9/ 월
청구 금액 $0 년900 월간 크레딧
1 명 전용
모든 모델
워크플로
Standard
$24/ 월
청구 금액 $0 년3200 월간 크레딧
1 명 전용
모든 모델
워크플로
Pro
$45/ 월
청구 금액 $0 년6200 공유 월간 크레딧
1 사용자
+ 최대 4 명 추가 비용으로 추가 가능
모든 모델
워크플로
Pro Max
$170/ 월
청구 금액 $0 년24000 공유 월간 크레딧
1 사용자
+ 최대 9 명 추가 비용으로 추가 가능
모든 모델
워크플로
Enterprise
더 높은 제한
사용자 정의
가격 및 청구 조건
대용량 크레딧
맞춤형 시트 제한
모든 모델
워크플로
Free
가볍게 사용해보기
$0
영구 무료
최대 20 크레딧
1명 전용
일부 모델
워크플로
자주 묻는 질문
How do I make a crash sound effect?
Describe the materials and the surface rather than the event. Say what is breaking, what it lands on, whether the pieces ring, splinter or shatter, and how long the debris keeps moving. A crash is really two sounds, the hit and the settle, and both need naming.
Why does my crash sound like a single hit?
Because the settle is missing. Real collisions carry on for seconds after the impact as pieces tumble, skid and come to rest, so ask for that tail explicitly. Without it the sound reads as something being struck rather than something being destroyed.
What is the difference between a crash and an impact?
An impact is one collision between two surfaces, while a crash is a collision plus the material coming apart afterwards. If you want the audience to hear destruction rather than force, the debris is the part carrying the message.
How do I make a crash sound heavier?
Add mass to the description instead of volume. Ask for a deep low body under the first hit and for more material coming down behind it. Raising the level of a thin break only makes a thin break louder, which is why heavy crashes are written, not mixed.
How do I make a crash sound like it happened further away?
Take the high edge off it and add a faint short echo behind. Distance removes the bright top of a sound and leaves the low rolling part, so describing that colour change works far better than simply asking for a quieter take.
Can I use a generated crash sound commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Building the break yourself also means the destruction matches the materials in your scene, which a borrowed clip almost never does.