Smoke alarm sound effect

The sound of a whole house going off at once, not one unit beeping. Set how many are sounding, how far out of step they drift, and how long the whole thing runs.

  • Ask for one unit or several, and how far out of step they drift
  • An alarm matched to the house in your scene rather than a shared stock blast
  • Clean audio at full strength that still leaves speech readable
A white ceiling disc shot from below with hard light flaring off its vents, a second disc soft behind it

Alarm patterns from one unit to a whole house

Whole house in full cry

Four units sounding at once and smearing into each other. The take most scenes want, because a house wired together never produces the tidy single pattern a lone unit does.

Right underneath it

One unit at close range, hard and narrow with a ring on the edge of every blast. Reach for it when the point of the shot is that the sound is unbearable to stand under.

Two units out of step

Two alarms a fraction apart, beating against each other into a wavering pulse. That interference is the detail nobody writes into a prompt, and the one that sells a real house.

Alarm locking in

One blast out of nowhere, a beat of silence, then the pattern settling in for good. The hesitation at the front is what an audience hears as the moment it started.

Alarm going ragged

Blasts thinning and breaking up as the unit loses strength. It reads as a house nobody is maintaining, which is a piece of character work an alarm can do on its own.

Hush confirmation

Two soft rounded tones with no edge on them, the sound of the house going quiet again. Small enough to place under a line, and the cue an edit needs to end the sequence.

Generate an alarm pattern from a prompt

시작점을 고르고 원하는 대로 수정한 뒤 Morphic에서 생성하세요.

생성하기

Ways to use a smoke alarm sound effect

Wake a scene up in a single frame

One blast out of silence turns a calm shot into an emergency before anybody moves. It plays identically over an animated interior or a first-person game trigger.

프롬프트 편집
Wake a scene up in a single frame

Run under a long take with no score

Twelve seconds of a whole house sounding fills a held shot on its own, which covers an evacuation, a cutscene or a wordless stretch in a documentary.

프롬프트 편집
Run under a long take with no score

Say what kind of home this is

A ragged failing unit and four crisp ones in step describe two completely different households, and the choice tells an audience more than a line of dialogue would.

프롬프트 편집
Say what kind of home this is

Put a fire beyond the door

Two units beating against each other tell an audience the alarm reaches further than the frame does, so a game level or an audio drama gets a house it never has to build.

프롬프트 편집
Put a fire beyond the door

간단한 가격

오늘 무료로 시작하고 언제든지 업그레이드하거나 취소할 수 있습니다.

Basic

$9/
청구 금액 $0

900 월간 크레딧

1 명 전용

모든 모델

워크플로

Standard

$24/
청구 금액 $0

3200 월간 크레딧

1 명 전용

모든 모델

워크플로

Pro

$45/
청구 금액 $0

6200 공유 월간 크레딧

1 사용자

+ 최대 4 명 추가 비용으로 추가 가능

모든 모델

워크플로

Pro Max

$170/
청구 금액 $0

24000 공유 월간 크레딧

1 사용자

+ 최대 9 명 추가 비용으로 추가 가능

모든 모델

워크플로

Enterprise

더 높은 제한

사용자 정의

가격 및 청구 조건

대용량 크레딧
맞춤형 시트 제한
모든 모델
워크플로
Pricing Gradient

Free

가볍게 사용해보기

$0

영구 무료

최대 20 크레딧
1명 전용
일부 모델
워크플로

자주 묻는 질문

What does a smoke alarm sound effect need to sound like?
Groups of three piercing blasts with a pause between the groups, and more than one unit sounding at once. Modern homes wire their alarms together, so the version an audience recognises is several units slightly out of step rather than one tidy pattern.
How do I make a smoke alarm sound effect?
Start with how many units are sounding. Give the number, say how far apart they drift from each other, describe the blasts as narrow and piercing with a hard front edge, group them in threes, and give the whole thing a length in seconds.
Why does my alarm sound too clean to be real?
Because only one unit is sounding. A single pattern arrives perfectly regular, while two or more alarms beat against each other into a rough wavering pulse. Asking for that interference is the single change that makes the result sound like a house.
Why does my alarm come back as a few beeps and then silence?
Because nothing asked it to keep going. Add unbroken or no gaps and state how many seconds the pattern has to run, and the model builds a sustained alarm rather than a couple of isolated groups with dead air after them.
How do I make an alarm read as ongoing without wearing out the audience?
Use the version losing strength rather than the full-strength one. Blasts that thin and break up hold the same information without hammering the same frequency, so a long sequence stays listenable while the alarm is still clearly going.
Can I use a generated smoke alarm sound commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Generating it also sidesteps a real production problem, since setting off a house full of alarms for a recording is not something a location will allow twice.