Generate sparks stock video in Morphic's AI video generator: grinder sparks arcing across black, or embers lifting off a campfire into the dark. Layer the set on Compose.

Sparks plates you can generate

Sparks sequences you can stage

Grinding a steel bar

A wide hold on gloved hands running a grinder down a steel bar in a dark shop, the spark fan lighting the bench and dying against the far wall.

프롬프트 편집

Embers rising into night sky

A low wide at the edge of a small campfire at night, embers streaming upward in the heat and scattering into a black sky, faint orange on the ground.

프롬프트 편집

Hammer striking hot iron

A close hold on a hammer coming down on glowing iron across an anvil, scale and sparks bursting sideways on each blow and dying on the dark floor.

프롬프트 편집

Wheel braking on a rail

A low track-side hold as a steel wheel brakes hard on a rail at dusk, a stream of sparks spraying back along the track and skipping off the sleepers.

프롬프트 편집

sparks stock 영상을 3단계로 만들기

  1. 일

    장면 설명하기

    원하는 sparks stock 장면을 쉬운 말로 작성하세요.

  2. 이

    영상 생성하기

    Morphic이 캔버스 위에 영화 같은 클립을 몇 초 만에 생성합니다.

  3. 삼

    다듬고 공유하기

    프롬프트를 조정해 다시 생성한 뒤, 원하는 장면을 저장하거나 공유하세요.

간단한 가격

오늘 무료로 시작하고 언제든지 업그레이드하거나 취소할 수 있습니다.

Basic

$19/ 월
청구 금액 $0 년

2400 월간 크레딧

1 명 전용

모든 모델

워크플로

Standard

$24/ 월
청구 금액 $0 년

3625 월간 크레딧

1 명 전용

모든 모델

워크플로

Pro

$45/ 월
청구 금액 $0 년

6350 공유 월간 크레딧

1 사용자

+ 최대 4 명 추가 비용으로 추가 가능

모든 모델

워크플로

Max

$170/ 월
청구 금액 $0 년

24650 공유 월간 크레딧

1 사용자

+ 최대 9 명 추가 비용으로 추가 가능

모든 모델

워크플로

Enterprise

더 높은 제한

사용자 정의

가격 및 청구 조건

대용량 크레딧
맞춤형 시트 제한
모든 모델
워크플로
Pricing Gradient

Free

가볍게 사용해보기

$0

영구 무료

최대 20 크레딧
1명 전용
일부 모델
워크플로

자주 묻는 질문

Where can I make sparks stock video with AI?
You can generate it in your browser on Morphic. Open the Text to Video tool, describe the source, the direction of the arc and the frame rate, and the plate generates in minutes. Real spark plates mean a grinder, a fire marshal and a lot of black drape, and generating skips all three.
Which sparks shots render most reliably?
A grinder fan on black, embers rising off a fire, a sparkler tip in macro and a single flint strike all come back with clean particles that light themselves. Dense welding spatter with a visible arc is harder because the arc blows out, and any plate that mixes sparks with open flame drifts toward fire and loses the particle detail.
How do I get a sparks plate that screen-blends without a box?
Ask for a pure black background, the sparks as the only light and no floor or bench in frame unless you want it lit, then screen or add the clip over your footage so the black drops away. State the direction and speed so the arc matches the motion underneath, and keep the density moderate; a solid wash of particles has no black left to remove.
How do I make sparks footage without it turning into fire or an explosion?
Keep every source small and specific: a grinder, a sparkler, a flint, embers off a fire that stays below frame. Say no flames and no smoke, and give a single direction of travel. Words like burst, blast and eruption, or any mention of fuel, push the model toward a fireball, and once flame appears the individual sparks disappear into it.
How is this different from a stock library subscription?
A library spark plate was lit from one side at one frame rate with the arc leaving frame left, and if your cut moves right you flip it and hope nobody notices the grain. Generating gives you the arc direction, the density and the speed that fit the shot, on true black, at the clip length the sequence actually needs. Nothing carries a watermark across the comp while the edit is still moving.