Generate static stock video in Morphic's AI video generator: a clean frame collapsing into snow, or noise blooming to white and settling back. Lay the pass over your cut on Compose.

Static plates you can generate

Static sequences you can stage

Signal drops to snow

A clean dark frame loses signal and collapses into full-frame monochrome noise in one beat, then holds steady at full density.

프롬프트 편집

Noise blooms to white

Full-frame noise rises sharply in brightness until the frame blooms to flat white, then falls back into grain. A transition beat.

프롬프트 편집

Chroma speckle drifting

Dense noise carrying warm and cold colour speckle drifts slowly across frame while the camera pushes in a little, the grain growing coarser.

프롬프트 편집

Static clears to black

Full-density noise thins out gradually until nothing is left but a clean black frame. The out-point that matches the drop-in.

프롬프트 편집

static stock video 영상을 3단계로 만들기

  1. 일

    장면 설명하기

    원하는 static stock video 장면을 쉬운 말로 작성하세요.

  2. 이

    영상 생성하기

    Morphic이 캔버스 위에 영화 같은 클립을 몇 초 만에 생성합니다.

  3. 삼

    다듬고 공유하기

    프롬프트를 조정해 다시 생성한 뒤, 원하는 장면을 저장하거나 공유하세요.

간단한 가격

오늘 무료로 시작하고 언제든지 업그레이드하거나 취소할 수 있습니다.

Basic

$19/ 월
청구 금액 $0 년

2400 월간 크레딧

1 명 전용

모든 모델

워크플로

Standard

$24/ 월
청구 금액 $0 년

3625 월간 크레딧

1 명 전용

모든 모델

워크플로

Pro

$45/ 월
청구 금액 $0 년

6350 공유 월간 크레딧

1 사용자

+ 최대 4 명 추가 비용으로 추가 가능

모든 모델

워크플로

Max

$170/ 월
청구 금액 $0 년

24650 공유 월간 크레딧

1 사용자

+ 최대 9 명 추가 비용으로 추가 가능

모든 모델

워크플로

Enterprise

더 높은 제한

사용자 정의

가격 및 청구 조건

대용량 크레딧
맞춤형 시트 제한
모든 모델
워크플로
Pricing Gradient

Free

가볍게 사용해보기

$0

영구 무료

최대 20 크레딧
1명 전용
일부 모델
워크플로

자주 묻는 질문

Does static stock video mean noise or a motionless shot?
On this page it means signal noise: snow, speckle, drop-outs and the flicker an editor lays over a cut as texture or a transition. If you came looking for a motionless camera, the term for that is a locked-off shot, and you get it by writing the camera move out of the prompt rather than searching for static.
Where can I make static stock video with AI?
You can generate it in your browser on Morphic. Open the Text to Video tool, describe the event, a drop to snow, a bloom to white, a build out of black, along with the density and the colour, and the pass renders in minutes ready to drop on a layer above your cut.
How do I blend a static pass into an existing edit?
Generate it against pure black and let the blend mode do the work: screen or add keeps the bright grain and drops the black, and an opacity ramp controls how far it intrudes. Ask for even density edge to edge so the layer does not fall off in the corners, and match the grain size to the footage underneath rather than the other way round.
Which static clips render most reliably?
Full-frame passes with one clear event are the safest: drop, bloom, build, clear. Anything that needs repeating structure across the frame, bars, test patterns or regular scan geometry, is the least reliable, and it also drags in designs you should not be reproducing. Keep the frame free of shapes and lettering.
How is this different from a static overlay pack from a stock library?
A pack gives you a fixed loop at a fixed density, a fixed length and one aspect ratio, so you stretch and mask it until it roughly fits. Generating means the density, the colour, the beat and the duration are written to the cut, in the ratio the project is finished in, with no repeating tell when the clip runs long.