Make the strike land as hard as it looks
Pins exploding on the exact frame turns a flat shot into a victory, and the same hit carries a bowling minigame or an animated pratfall.
Modifier le prompt
Bowling
Every sound the alley runs on, ready to drop on the frame: the roll of the ball, the crash of a strike, the rumble of the return, and the clatter of pins. Describe the one your bowling edit needs and Morphic generates it in seconds.
- Control the roll, the pin scatter and how much of the alley you hear behind it
- An alley built around your scene rather than the one recording everybody downloads
- Rolls and crashes arrive as separate takes, so the pins can hit on the shot that shows them
Bowling sounds for video, games, and animation
Lane roll
The heavy rumble of a ball travelling wood, close and low, with the approach thud sitting at the front of it.
Strike crash
All ten going down at once, a chaotic burst of wood and clatter for the moment everything connects.
Single pin tap
One pin wobbling and dropping late, the small anticlimax that makes a near miss funny or painful.
Ball return
The mechanical thunk and rolling growl of a ball coming back, a natural piece of business between lines of dialogue.
Gutter roll
A duller drifting roll that ends without pins, instantly recognisable as a throw gone wrong.
Pinsetter
The motorised sweep and reset of the rack overhead, the machinery that makes an alley sound like a real building.
Generate a bowling sound from a prompt
Choisissez un point de départ, modifiez ce que vous voulez, puis générez dans Morphic.
Ways to use a bowling sound effect
When a character is stalling between turns
Quiet stretches between throws get a rumbling ball return and distant clatter to occupy them, useful in drama, comedy and audio storytelling.
Modifier le prompt
A Friday night alley, three lanes over
Layered rolls, crashes and machinery from neighbouring lanes place a conversation in a working alley without any wide shot at all.
Modifier le prompt
The game happening past the edge of frame
A crash off to one side means someone else just did better, which is a cheap way to build rivalry in a film or a level.
Modifier le prompt
Vous pourriez aussi aimer
Swimming sound effects
Swimming sound effects: strokes cutting water, a dive splash, bubbles below the surface, and the drip of climbing out. Generated for your scene.
Tennis sound effects
Tennis sound effects, groundstrokes, serves, sneaker squeaks, umpire calls and courtside applause, generated for your own match footage, gameplay or ad.
Video game sound effects
Generate video game sound effects with Morphic. Describe the pickup, the hit, or the level-up cue and get clean audio for your build.
Arcade sound effects
Arcade sound effects for retro scenes: coin-op credit clunks, laser blasters, crunchy explosions, attract-mode blips, pinball pings and a high-score fanfare.
Plus d'effets sonores dans Sports & games
Tarifs simples
Commencez gratuitement dès aujourd'hui, avec la possibilité de mettre à niveau ou d'annuler à tout moment.
Basic
$9/ mois
facturé comme $0 par an1100 mensuel crédits
1 utilisateur uniquement
Tous les modèles
Workflows
Standard
$24/ mois
facturé comme $0 par an3625 mensuel crédits
1 utilisateur uniquement
Tous les modèles
Workflows
Pro
$45/ mois
facturé comme $0 par an6350 partagé mensuel crédits
1 utilisateur
+ jusqu'à 4 plus à un coût supplémentaire
Tous les modèles
Workflows
Max
$170/ mois
facturé comme $0 par an24650 partagé mensuel crédits
1 utilisateur
+ jusqu'à 9 plus à un coût supplémentaire
Tous les modèles
Workflows
Enterprise
Pour des limites plus élevées
Personnalisé
conditions de tarification et de facturation
Crédits à haut volume
Limites de sièges personnalisées
Tous les modèles
Workflows
Free
Pour expérimenter
$0
gratuit pour toujours
Jusqu'à 20 crédits
1 utilisateur uniquement
Modèles limités
Workflows
Questions fréquentes
What are bowling sound effects?
They are the audio cues that make a bowling edit read: the low rumble of a ball rolling down the lane, the heavy crash and clatter of a strike, the light tap of a single pin, the mechanical rumble of the ball return, and the whir of the pinsetter. Each one tells the audience what is happening on the lane before the picture does, which is why an alley scene leans on them.
Where can I get bowling sounds for a video?
Generate them rather than search for them. Describing the sound you want takes less time than digging through a stock library, and you get the specific take your edit needs instead of the closest available match. Every sound on this page was made from the prompt printed beside it, so you can start from one and adjust it.
How do I make a custom bowling sound effect?
Describe the source, the action, and whether it is one impact or a continuous roll, then generate it. A prompt like "one bowling ball crashing into ten pins for a strike, about 2 seconds" gives Morphic enough to work with, and you can adjust the wording until the take fits your cut.
How do I get a convincing strike crash?
Ask for the two parts separately in the prompt: the heavy impact of the ball meeting the front pin, and the clattering scatter of all ten falling wood on wood. Naming both is what gives the crash its weight and its messy tail, and keeping it around two seconds lets the scatter ring out rather than clipping the moment short.
Can I use these bowling sounds commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Because each sound is generated rather than pulled from a shared library, you also avoid the clip turning up in someone else's video.
Why does my bowling sound effect not sit right in the edit?
Usually the perspective is wrong rather than the sound itself. A close, dry strike crash laid under a wide shot down the lane feels pasted on, because the ear expects distance to match the frame. Say how far down the alley the throw is when you generate it, and the sound sits in the scene with far less mixing.