The ceiling gives, right on the cut
A concrete slab hitting the floor gives an impact its aftermath, whether the shot is a stunt sequence, an animated panel or a level cutscene.
プロンプトを編集
Debris
The scatter and settle of broken material after something gives way: tumbling rubble, clattering splinters, and grit sifting down. Describe the debris your shot needs and Morphic generates it in seconds.
- Match the material, concrete, timber and broken glass each fall with their own weight and rhythm.
- Built around your shot rather than pulled from a library everyone else has already worked through.
- Delivered as separate falls and settles, so you can place each one exactly where the dust lands.
Debris sounds for animation, games, and video edits
Falling rubble
A sustained cascade of broken concrete and brick, the main body of any collapse, dense enough to carry several seconds on its own.
Settling fragments
The quieter aftermath: small pieces sliding, tipping and finding their rest once the big fall is over.
Wood splinters
Dry timber cracking and shedding sharp fragments, right for barns, floorboards and anything old giving up.
Glass and grit
Bright shards mixed with fine dust, the scatter you get from a blown-out window rather than a stone wall.
Single chunk
One isolated lump landing with a thud. Place it late, after everything else has stopped, for a jolt.
Grit trickle
A thin, almost delicate stream of dust and small stones, barely there, and easy to keep under dialogue.
Generate a debris sound from a prompt
出発点を選び、好きなように編集して、Morphicで生成しましょう。
Ways to use debris sound effects
When the blast ends and nothing has happened yet
Blasts end abruptly; a slow trickle of grit keeps the moment alive for a few more seconds in trailers, audio drama and horror walkthroughs.
プロンプトを編集
A building abandoned for years
Loose fragments shifting on their own paint a derelict factory or a bombed-out street, doing more for a location than a wide shot usually can.
プロンプトを編集
Something collapsed in the next street
Rubble tumbling somewhere out of frame tells listeners the disaster is spreading, a cheap and convincing way to widen a scene in film or radio.
プロンプトを編集
こちらもおすすめ
Car crash sound effect
Generate a car crash sound effect with Morphic. Choose the heft, the glass, and the debris that follows, instead of layering three stock hits.
Crash sound effect
Generate crash sound effects with Morphic. Set the weight, material, and impact size you need for a hit that lands in the mix.
Demolition sound effects
Demolition sound effects with real mass behind them, wrecking ball impacts, walls caving in, floors giving way and jackhammers biting into concrete.
Explosion sound effects
Need a explosion sound effect with real weight? Morphic generates it to your spec, so the impact sits right against the picture.
Impacts & actionの効果音をもっと見る
シンプルな料金体系
今すぐ無料で始めて、いつでもアップグレードまたはキャンセルできます。
Basic
$9/ 月
請求額は $0 年900 月 クレジット
1 ユーザーのみ
すべてのモデル
ワークフロー
Standard
$24/ 月
請求額は $0 年3200 月 クレジット
1 ユーザーのみ
すべてのモデル
ワークフロー
Pro
$45/ 月
請求額は $0 年6200 共有 月 クレジット
1 ユーザー
+ 最大 4 名まで追加費用
すべてのモデル
ワークフロー
Pro Max
$170/ 月
請求額は $0 年24000 共有 月 クレジット
1 ユーザー
+ 最大 9 名まで追加費用
すべてのモデル
ワークフロー
Enterprise
より高い制限のために
カスタム
料金と請求条件
大容量クレジット
カスタムシート制限
すべてのモデル
ワークフロー
Free
気軽に試したい方に
$0
ずっと無料
最大20クレジット
1ユーザーのみ
一部のモデル
ワークフロー
よくある質問
What is a debris sound effect?
It is the sound of broken material moving after something gives way: rubble tumbling down, fragments settling, splinters scattering, or grit sifting off stone. On screen it sells a collapse or an impact you may not fully show, telling the audience that something structural has just come apart.
Where can I get debris sounds for a video?
Generate them rather than search for them. Describing the debris you want takes less time than digging through a stock library, and you get the exact scatter your scene needs instead of the closest available clip. Every sound on this page was made from the prompt printed beside it, so you can start from one and adjust it.
How do I make a custom debris sound effect?
Describe the material, how much is falling, and how it settles, then generate it. A prompt like "fist-sized rocks and grit tumbling down onto hard ground, about two seconds" gives Morphic enough to work with, and you can adjust the wording until the scatter fits your cut.
What is the difference between debris and a rubble or crash sound?
A crash is the single moment of impact; debris is everything that moves afterwards, the loose material tumbling, scattering, and settling. Layering the two is what makes a collapse feel real: the crash lands the hit, and the debris tail tells the audience how much came down.
Can I use these debris sounds commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Because each sound is generated rather than pulled from a shared library, you also avoid the clip turning up in someone else's video.
Why does my debris sound not sit right in the edit?
Usually it is the length rather than the sound itself. Debris that stops the instant the picture cuts feels clipped, because real rubble keeps trickling after the crash. Generate a version with a longer settling tail and let it run a few frames past the cut, and the collapse reads far more convincingly.