The ceiling gives, right on the cut
A concrete slab hitting the floor gives an impact its aftermath, whether the shot is a stunt sequence, an animated panel or a level cutscene.
프롬프트 편집
Debris
The scatter and settle of broken material after something gives way: tumbling rubble, clattering splinters, and grit sifting down. Describe the debris your shot needs and Morphic generates it in seconds.
- Match the material, concrete, timber and broken glass each fall with their own weight and rhythm.
- Built around your shot rather than pulled from a library everyone else has already worked through.
- Delivered as separate falls and settles, so you can place each one exactly where the dust lands.
Debris sounds for animation, games, and video edits
Falling rubble
A sustained cascade of broken concrete and brick, the main body of any collapse, dense enough to carry several seconds on its own.
Settling fragments
The quieter aftermath: small pieces sliding, tipping and finding their rest once the big fall is over.
Wood splinters
Dry timber cracking and shedding sharp fragments, right for barns, floorboards and anything old giving up.
Glass and grit
Bright shards mixed with fine dust, the scatter you get from a blown-out window rather than a stone wall.
Single chunk
One isolated lump landing with a thud. Place it late, after everything else has stopped, for a jolt.
Grit trickle
A thin, almost delicate stream of dust and small stones, barely there, and easy to keep under dialogue.
Generate a debris sound from a prompt
시작점을 고르고 원하는 대로 수정한 뒤 Morphic에서 생성하세요.
Ways to use debris sound effects
When the blast ends and nothing has happened yet
Blasts end abruptly; a slow trickle of grit keeps the moment alive for a few more seconds in trailers, audio drama and horror walkthroughs.
프롬프트 편집
A building abandoned for years
Loose fragments shifting on their own paint a derelict factory or a bombed-out street, doing more for a location than a wide shot usually can.
프롬프트 편집
Something collapsed in the next street
Rubble tumbling somewhere out of frame tells listeners the disaster is spreading, a cheap and convincing way to widen a scene in film or radio.
프롬프트 편집
이런 것도 좋아하실 거예요
Snap sound effect
Morphic creates snap sound effects from a text prompt. Choose the heft and texture your cut needs instead of layering three stock hits together.
Splat sound effect
Need a splat sound effect with real weight? Morphic generates it to your spec, so the impact sits right against the picture.
Stomp sound effects
Stomp sound effects: boots on concrete, marching lines, giant footfalls and crowd stomps for film trailers, animation, game design and percussive edits.
Sword clash sound effects
Sword clash sound effects: parries, scraping steel, fast flurries, draws, and shield impacts, ready for your fight scene or combat animation.
Impacts & action 효과음 더 보기
간단한 가격
오늘 무료로 시작하고 언제든지 업그레이드하거나 취소할 수 있습니다.
Basic
$9/ 월
청구 금액 $0 년1100 월간 크레딧
1 명 전용
모든 모델
워크플로
Standard
$24/ 월
청구 금액 $0 년3625 월간 크레딧
1 명 전용
모든 모델
워크플로
Pro
$45/ 월
청구 금액 $0 년6350 공유 월간 크레딧
1 사용자
+ 최대 4 명 추가 비용으로 추가 가능
모든 모델
워크플로
Pro Max
$170/ 월
청구 금액 $0 년24650 공유 월간 크레딧
1 사용자
+ 최대 9 명 추가 비용으로 추가 가능
모든 모델
워크플로
Enterprise
더 높은 제한
사용자 정의
가격 및 청구 조건
대용량 크레딧
맞춤형 시트 제한
모든 모델
워크플로
Free
가볍게 사용해보기
$0
영구 무료
최대 20 크레딧
1명 전용
일부 모델
워크플로
자주 묻는 질문
What is a debris sound effect?
It is the sound of broken material moving after something gives way: rubble tumbling down, fragments settling, splinters scattering, or grit sifting off stone. On screen it sells a collapse or an impact you may not fully show, telling the audience that something structural has just come apart.
Where can I get debris sounds for a video?
Generate them rather than search for them. Describing the debris you want takes less time than digging through a stock library, and you get the exact scatter your scene needs instead of the closest available clip. Every sound on this page was made from the prompt printed beside it, so you can start from one and adjust it.
How do I make a custom debris sound effect?
Describe the material, how much is falling, and how it settles, then generate it. A prompt like "fist-sized rocks and grit tumbling down onto hard ground, about two seconds" gives Morphic enough to work with, and you can adjust the wording until the scatter fits your cut.
What is the difference between debris and a rubble or crash sound?
A crash is the single moment of impact; debris is everything that moves afterwards, the loose material tumbling, scattering, and settling. Layering the two is what makes a collapse feel real: the crash lands the hit, and the debris tail tells the audience how much came down.
Can I use these debris sounds commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Because each sound is generated rather than pulled from a shared library, you also avoid the clip turning up in someone else's video.
Why does my debris sound not sit right in the edit?
Usually it is the length rather than the sound itself. Debris that stops the instant the picture cuts feels clipped, because real rubble keeps trickling after the crash. Generate a version with a longer settling tail and let it run a few frames past the cut, and the collapse reads far more convincingly.