Land a blast on the frame it belongs on
The close take has a hard front edge, so it hits exactly where you place it. That precision matters as much in a game explosion as it does in an action cut.
Modifier le prompt
Bomb sound effect
A bomb is a sequence, not a bang. Generate the countdown, the fuse, the detonation, and the debris that settles after it, each sized to your shot.
- Set the size of the blast, its distance, and how long the tail runs
- A detonation cut for your shot instead of the stock blast in every trailer
- Clean audio with the front crack intact, ready to lay against picture
Blasts, fuses, and aftermath for action scenes
Close detonation
The full event at close range: a cracking front edge, a pressure wave behind it, then a rough tail. This is the take most action cuts want, because the crack is what makes the picture flinch.
Distant blast
The same detonation with the high crack stripped out and a long roll behind it. Distance is a change of colour rather than volume, which is why turning the close take down never sounds far away.
Fuse and bang
Three seconds of fizzing spark before the crack arrives. The wait is doing all the tension work, so it earns its place any time the audience needs to see it coming.
Countdown beeps
Bright timer tones tightening towards zero. Nothing else establishes a clock so quickly, and the acceleration means it works under a shot of any length.
Underwater thump
A charge going off below the surface, all body and no edge. Reach for it when the blast happens behind a wall, under water, or a floor below, where the top end never reaches the audience.
Debris settling
What is left once the blast has gone: fragments raining down and skittering to a stop. It is the part most edits forget, and the part that makes the explosion feel like it happened somewhere real.
Generate a blast from a prompt
Choisissez un point de départ, modifiez ce que vous voulez, puis générez dans Morphic.
Ways to use a bomb sound effect
Hold a silent shot with falling debris
Fragments raining down carry the seconds after a blast with no score at all. It works under a comic panel transition or an animated aftermath as readily as under film.
Modifier le prompt
Put your scene inside a war rather than beside one
A dull rolling blast with no high edge places the fighting somewhere over the horizon. One take sets the whole geography of a level, a scene, or a radio drama.
Modifier le prompt
Show a countdown you never have to build
Accelerating timer beeps tell an audience there is a device somewhere without a single shot of one. Cheaper than an effect and clearer than a caption, on screen or in audio.
Modifier le prompt
Vous pourriez aussi aimer
Slam sound effects
Slam sound effects with real weight behind them, doors, lockers, car doors, metal gates and a fist on a table, recorded close and edited clean.
Slap sound effect
Generate slap sound effects with Morphic. Set the weight, the material, and the size of the contact for a hit that lands in your mix.
Snap sound effect
Morphic creates snap sound effects from a text prompt. Choose the heft and texture your cut needs instead of layering three stock hits together.
Splat sound effect
Need a splat sound effect with real weight? Morphic generates it to your spec, so the impact sits right against the picture.
Plus d'effets sonores dans Impacts & action
Tarifs simples
Commencez gratuitement dès aujourd'hui, avec la possibilité de mettre à niveau ou d'annuler à tout moment.
Basic
$9/ mois
facturé comme $0 par an1100 mensuel crédits
1 utilisateur uniquement
Tous les modèles
Workflows
Standard
$24/ mois
facturé comme $0 par an3625 mensuel crédits
1 utilisateur uniquement
Tous les modèles
Workflows
Pro
$45/ mois
facturé comme $0 par an6350 partagé mensuel crédits
1 utilisateur
+ jusqu'à 4 plus à un coût supplémentaire
Tous les modèles
Workflows
Pro Max
$170/ mois
facturé comme $0 par an24650 partagé mensuel crédits
1 utilisateur
+ jusqu'à 9 plus à un coût supplémentaire
Tous les modèles
Workflows
Enterprise
Pour des limites plus élevées
Personnalisé
conditions de tarification et de facturation
Crédits à haut volume
Limites de sièges personnalisées
Tous les modèles
Workflows
Free
Pour expérimenter
$0
gratuit pour toujours
Jusqu'à 20 crédits
1 utilisateur uniquement
Modèles limités
Workflows
Questions fréquentes
What is in a bomb sound effect?
Three parts: a sharp cracking front edge, a low pressure wave behind it, and a tail of debris and reflections. Most weak explosions are missing the third one, which is why they stop dead instead of feeling like they happened in a place.
How do I make a bomb sound effect from a description?
Describe the front edge, the low body, the distance, and the length of the tail. Naming a weapon gives a model very little to work with, while those four physical details decide everything a listener actually hears.
How do I make an explosion sound far away?
Ask for the high crack to be gone and the tail to roll rather than snap. Distance removes high frequencies and adds reflections, so it is a change in colour, not a change in level. Turning a close blast down just makes it a quiet close blast.
How do I make a bomb sound bigger without clipping the mix?
Add length rather than level. A longer, rougher tail and a slower decay read as more size than a louder transient, and they leave headroom for dialogue. Layering the debris take underneath adds scale for the same reason.
What sound works for a bomb behind a wall or underwater?
Ask for a muffled low thump with no high edge at all. Solid material and water both remove the top end first, so a blast heard through either is nearly all body. Adding a churning surge afterwards sells the underwater version specifically.
Can I use a generated bomb sound effect commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Generating the blast also keeps a game or a trailer off the handful of stock detonations that action audiences have heard many times already.