Communications

A high chirp opening a transmission, a run of beeps as the link locks on and a signal breaking into dropouts. Describe the communications sound and Morphic generates it clean, with no voice on the line.

  • Transmission chirps, a link locking on or a lost signal, each in your own words
  • Comms tones built for your lunar landing scene or a squad channel mid-mission
  • Clean tones with no voice on the line, ready to bracket your own dialogue
A hand pressing the talk key on a plain radio console under warm light against a pure black ground, a green indicator light flaring

Communications sounds for games, animation, and video edits

Transmission chirps

A high chirp in and a lower chirp out, twice, the tones that bracket each message in space missions and military radio.

Link established

Rising beeps, a burst of static and a click as the line opens, the moment two sides finally connect on a mission or a rescue call.

Squelch tail

A sharp burst of noise cut by a click, twice, the end of a radio call for police, pilots, security teams or a squad.

Data burst

A fast screech of digital warble, for coded messages, a satellite uplink, a hacker sending files or alien signals.

Signal lost

A carrier tone breaking into dropouts and a flat tone, the sound of contact cut off with a crew, a drone or a probe.

Incoming alert

A bright two-tone chime three times, for a console calling for attention, a ship hail or a dispatch desk lighting up.

Generate a communications sound from a prompt

出発点を選び、好きなように編集して、Morphicで生成しましょう。

生成

Ways to use a communications sound effect

Make a message from command cut in

Transmission chirps on the frame the order arrives give the line its authority, in space films, military games and animated sci-fi.

プロンプトを編集
Make a message from command cut in

Fill a tense radio silence without music

Squelch tails between unanswered calls carry a long wait for a reply with no score, in thrillers, rescue dramas, games and audio fiction.

プロンプトを編集
Fill a tense radio silence without music

Set a mission control mood in one shot

An incoming alert chiming over the opening shot places the audience in a control room as something begins, for space films, sims and podcasts.

プロンプトを編集
Set a mission control mood in one shot

Hint that the team has lost contact

A signal breaking up over a shot of an empty headset says the crew is gone without a word spoken, in horror games, thrillers and radio plays.

プロンプトを編集
Hint that the team has lost contact

シンプルな料金体系

今すぐ無料で始めて、いつでもアップグレードまたはキャンセルできます。

Basic

$19/ 月
請求額は $0 年

2400 月 クレジット

1 ユーザーのみ

すべてのモデル

ワークフロー

Standard

$24/ 月
請求額は $0 年

3625 月 クレジット

1 ユーザーのみ

すべてのモデル

ワークフロー

Pro

$45/ 月
請求額は $0 年

6350 共有 月 クレジット

1 ユーザー

+ 最大 4 名まで追加費用

すべてのモデル

ワークフロー

Max

$170/ 月
請求額は $0 年

24650 共有 月 クレジット

1 ユーザー

+ 最大 9 名まで追加費用

すべてのモデル

ワークフロー

Enterprise

より高い制限のために

カスタム

料金と請求条件

大容量クレジット
カスタムシート制限
すべてのモデル
ワークフロー
Pricing Gradient

Free

気軽に試したい方に

$0

ずっと無料

最大20クレジット
1ユーザーのみ
一部のモデル
ワークフロー

よくある質問

What is a communications sound effect?
Communications sound effects are the non-verbal tones around a transmission: chirps that open and close a message, beeps as a link connects, squelch tails, data bursts and the sound of a signal dropping. They tell the audience a message is being sent or lost.
Where can I get communications sounds for a video?
Use Morphic to generate them from a short description of the transmission. That is quicker than pulling apart radio recordings to remove voices, and the tones are clean. Every sound on this page was made from the prompt printed beside it.
How do I make a custom communications sound effect?
Pick the moment in the message, the tone and the count, then generate it. A prompt like "a comms link connecting, a quick run of rising digital beeps, a burst of static" gives Morphic a clear sequence, and you can make it more analog or more digital.
What is the difference between a transmission chirp, a squelch and radio static?
A transmission chirp is a short clean tone that marks the start or end of a message. A squelch is the burst of noise and click when a two-way radio stops sending. Radio static is the steady hiss of an untuned or weak signal underneath everything else.
Can I use these communications sounds commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Because each sound is generated for you, you also avoid the clip turning up in someone else's video.
Why does my communications sound not sit right in the edit?
Comms tones should frame the dialogue, so they jar when they overlap it. Put the opening chirp just before the first word and the closing chirp or squelch just after the last, and band-limit the voice so it sounds like it came through the same radio.