Smoke detector sound effect

The chirp that wakes a house at 3am, and the horn pattern behind it. Ask for the exact beep, the spacing, and how harsh it sits against dialogue.

  • Ask for the chirp, the blast pattern, and how many beeps land
  • A unit that sounds like the one in your scene, not the clip everyone reuses
  • Clean, dry audio that sits under speech without swallowing it
A white plastic detector disc seen from directly below, one red pinpoint lit against flat shadow

Detector beeps and alarm patterns for any edit

Low battery chirp

One piercing beep with nothing after it, on its own. This is the take most edits want, because the chirp is the sound everybody recognises before anyone explains what it is.

Test button blast

Three hard blasts then silence, the pattern a unit makes when somebody presses it deliberately. It reads as a check rather than an emergency, which is a different scene entirely.

Full alarm pattern

Groups of three repeating with a pause between them, running long enough to lay under a whole shot. The pause is what makes it read as an alarm and not a continuous tone.

Dulled alarm

The same pattern with the top gone off it and a small echo trailing behind. That colour change is what tells an audience the alarm is somewhere other than where the camera is.

End of life double chirp

Two clipped beeps close together instead of one. The doubling is the detail that separates a unit asking for a battery from a unit asking to be replaced.

Alarm cutting out

A blast stopped dead partway through by a soft acknowledgement beep. Useful when the point of the moment is somebody silencing the thing rather than the alarm itself.

Generate a detector beep from a prompt

选择一个起点,随意修改,然后在 Morphic 中生成。

生成

Ways to use a smoke detector sound effect

Break a calm moment with one beep

A single chirp lands on the frame and stops, so a quiet shot turns without anything else changing. It works in a game interior or an animated short as readily as live action.

编辑提示词
Break a calm moment with one beep

Hold a wordless stretch without adding music

The repeating pattern runs long enough to carry a held shot on its own, and gives an edit a rhythm to cut against in a podcast segment or a cutscene.

编辑提示词
Hold a wordless stretch without adding music

Tell the audience nobody has fixed anything

A double chirp repeating in a scene says more about a household than a line of dialogue could. It reads as neglect, poverty or exhaustion depending on what is around it.

编辑提示词
Tell the audience nobody has fixed anything

Suggest a fire you never put on screen

A dulled alarm with an echo behind it places trouble beyond the frame, so a game level or an animated sequence gets an emergency it never has to render.

编辑提示词
Suggest a fire you never put on screen

简单定价

今天就免费开始,随时可以升级或取消。

Basic

$9/
账单金额为 $0 每年

900 每月 信用

1 个用户

所有模型

工作流

Standard

$24/
账单金额为 $0 每年

3200 每月 信用

1 个用户

所有模型

工作流

Pro

$45/
账单金额为 $0 每年

6200 共享 每月 信用

1 用户

+ 最多 4 人额外付费可增加

所有模型

工作流

Pro Max

$170/
账单金额为 $0 每年

24000 共享 每月 信用

1 用户

+ 最多 9 人额外付费可增加

所有模型

工作流

Enterprise

更高的限制

自定义

定价和账单条款

大容量信用
自定义席位限制
所有模型
工作流
Pricing Gradient

Free

供随意体验

$0

永久免费

最多 20 积分
仅1个用户
部分模型
工作流

常见问题

What does a smoke detector sound effect need to sound like?
A narrow, piercing electronic tone with a hard front edge and almost no tail. Everything recognisable about it is in the spacing rather than the tone itself: one chirp reads as a battery, three blasts read as an alarm, and two close together read as a unit at the end of its life.
How do I make a smoke detector sound effect?
Describe the beep and then the pattern. Say how sharp the attack is, how high and narrow the tone sits, how many beeps arrive together, and how long the silence between groups runs. The pattern is what an audience actually reads.
Why does my alarm come back sounding like a car reversing?
Because the tone was described without the pitch. Reversing beepers sit much lower and softer, so ask explicitly for a piercing high tone with a hard attack and no tail, and the result moves into detector territory straight away.
How do I make the alarm sound like it is in another part of the building?
Change the colour rather than the volume. Ask for the high edge to be gone, the tone dulled, and a faint short echo behind each blast. Turning a bright take down just makes a quiet bright alarm, which never reads as distance.
How do I stop the beeps fighting with dialogue?
Use the dulled version under speech and save the piercing one for gaps between lines. A detector tone sits in the same band as consonants, so the bright take will mask words wherever you put it.
Can I use a generated smoke detector sound commercially?
Yes, audio generated on paid plans can be used commercially. See our terms for full licensing details. Generating the beep also means the pattern in your scene matches the unit you put on screen, rather than whatever a stock upload happened to record.