Product photography prompt library

Product photography prompt library on Morphic

Tested product photography prompts you can copy and run on Morphic. Each one explains what the parts do, so you can adapt rather than guess.

Amber serum bottle on a warm grey sweep with a controlled background gradient, generated with Krea 2 Large

Amber serum bottle on a sweep

Studio product photograph of a 30ml amber glass serum bottle with a matte black pump, labelled VERRAINE in small letterspaced capitals. Standing on a seamless sweep that runs from warm mid grey directly behind the bottle to near black at the top edge of the frame, with no visible horizon line. Key light from a large softbox at the upper left, a white bounce card just out of frame on the right lifting the shadow side. One narrow strip highlight down the left shoulder of the glass. Fine dust removed, glass edges crisp, 4:5 portrait.

Edit prompt
Water crown splash around a dropped ice cube in a glass tumbler, generated with Krea 2 Large

Ice cube crown in sparkling water

High-speed photograph of a single ice cube hitting the surface of sparkling water in a heavy-based tumbler, caught at the moment the splash forms a symmetrical crown with eight or nine separated droplets rising from its rim and one larger droplet lifting above the centre. Fine bubbles streaming off the cube underwater. Lit from behind through a large diffusion panel so the water reads bright and the glass edges go dark. Deep blue-grey background, condensation already forming on the outside of the glass, 1:1 square.

Edit prompt
Hand lifting a coffee bag from a kitchen counter in real morning light, generated with Krea 2 Large

Coffee bag lifted off a counter

Lifestyle product photograph of a person at a kitchen counter lifting a matte kraft coffee bag labelled OKARA off the worktop, their forearm and hand in frame gripping the top seal with the thumb visible against the label. Real morning light from a window on the left, slightly uneven across the counter. A ground coffee spill, a moka pot and a chipped mug beside them. Warm oak worktop, pale tiled splashback. Shallow depth of field so the label stays sharp and the background softens, believable skin texture, 3:2 landscape.

Edit prompt
Backlit green glass bottle glowing through the liquid with a dark rim, generated with Krea 2 Large

Green juice bottle, backlit

Studio product photograph of a tall green glass bottle of cold-pressed juice, lit from directly behind through a large diffusion panel so the liquid glows a saturated green and the level line is clearly visible. Black flags either side keeping the glass edges dark so the bottle silhouette stays defined against a bright background. A simple uncoated paper label with the word NIMBRA in a small serif. Condensation beading unevenly on the shoulder. Background reading as a bright soft gradient, base of the bottle sitting in shadow, 2:3 portrait.

Edit prompt
Macro of leather grain on a wallet edge with visible stitch holes, generated with Krea 2 Large

Leather wallet edge

Macro photograph of the edge of a folded leather wallet in tan vegetable-tanned hide, close enough to read the natural grain and its slight variation across the surface. Saddle stitching in waxed linen thread running along the edge at a consistent angle, each stitch hole slightly recessed, and a burnished and painted edge in a darker tan with a fine sheen. One faint scar in the hide left visible. Low raking light from the left so the grain casts micro shadows, background dark and out of focus, 3:2 landscape.

Edit prompt
Coffee bag with loose beans arranged as a controlled scatter, generated with Krea 2 Large

Coffee bag with scattered beans

Product photograph of a matte black coffee bag standing upright with roasted beans scattered across the surface in front of it, the scatter dense right at the base of the bag and thinning out toward the frame edges so the eye is led back to the pack. Bag labelled TESSARO in small white capitals with a single kraft valve visible. Warm side light from the right so every bean casts its own small shadow and the bag's matte finish stays even. Dark walnut surface, one bean standing on end. Rich brown palette, 3:2 landscape.

Edit prompt
Hard sunlight through a window frame striping a bottle and its surface, generated with Krea 2 Large

Frosted bottle in a window shadow

Studio product photograph of a frosted glass bottle standing on a plaster block, with the hard shadow of a six-pane window cast diagonally across both the product and the surface behind it, so bright bars and dark bars cross the bottle. A single hard source imitating direct sun, no fill on the shadow side. Plaster surface showing genuine texture and a chipped corner. Warm afternoon colour, deep contrast between lit and unlit bands, the label sitting inside a lit band so it stays readable, 1:1 square.

Edit prompt
Cutout packshot of a cream tin on pure white with only a contact shadow, generated with Krea 2 Large

Cutout packshot for a listing

E-commerce packshot of a squat aluminium cream tin with a brushed lid, labelled HALDEN in small type, photographed straight on and slightly above. Pure white background with no gradient and no visible surface, lit by two large diffused sources at 45 degrees either side so the tin carries no hard shadow of its own. A single thin contact shadow directly under the base only. Even exposure across the lid, the brushed radial grain reading clearly, the type on the label sharp and legible. Clean unmarked white, nothing else in frame, 1:1 square.

Edit prompt
Olive oil pouring in an unbroken ribbon frozen mid-air into a shallow bowl, generated with Krea 2 Large

Olive oil mid-pour

High-speed studio photograph of green olive oil pouring from a dark glass bottle into a shallow ceramic bowl, frozen with a fast flash so the stream reads as an unbroken twisting ribbon with a slight spiral in it and two small droplets already separated at the base. Backlit from behind through a diffusion panel so the oil glows a deep green where it is thinnest. Bottle held at an angle at the top of frame, hand cropped out. Dark olive background, one bright rim on the bowl edge, 2:3 portrait.

Edit prompt
Trainer floating above its own soft shadow against a coloured backdrop, generated with Krea 2 Large

Trainer floating with its shadow

Studio product photograph of a single low-profile trainer in off-white leather and gum rubber, suspended in mid air at a slight three-quarter angle with no visible support, and its soft shadow sitting on the surface directly below where it would land. Flat backdrop in muted terracotta running seamlessly into the floor. Key light from the upper right giving a clean highlight along the toe cap, a subtle fill from the left. Laces caught in a natural fall rather than arranged. Sharp stitching and eyelet detail, 4:5 portrait.

Edit prompt
Cold drinks can with uneven condensation and one running droplet, generated with Krea 2 Large

Chilled can with condensation

Close product photograph of a chilled aluminium drinks can, its surface covered in condensation that is denser near the base and sparse at the top, with several droplets merged into larger beads and one running down leaving a clear track through the mist. Matte pale blue can with a small printed wordmark. Backlit from the upper left so every droplet carries a tiny highlight, a soft fill from the front keeping the label readable. Deep blue-grey background, the top rim of the can catching one hard specular line, 4:5 portrait.

Edit prompt
Brushed steel watch case with a controlled strip highlight and clean dial, generated with Krea 2 Large

Steel watch case, one strip light

Macro product photograph of a brushed stainless steel watch case with a polished bezel, lit so a single long soft strip light runs down the polished edge and nothing else reflects in it. Black cards surrounding the set so the rest of the metal stays dark and the brushed radial grain on the case side reads clearly. Matte off-white dial with slim baton markers, no branding, a domed sapphire crystal showing one faint curved reflection. Deep grey background, shallow focus falling off at the lug. Sharp micro texture, 1:1 square.

Edit prompt
Lit candle in a glass vessel where the flame is the main light source, generated with Krea 2 Large

Candle lighting its own vessel

Product photograph of a lit candle in a heavy ribbed glass vessel, the flame acting as the key light so the ribs glow brightest near the top and fall away toward the base, and the surrounding surface is lit only by that spill. A very low cool fill from the left keeping the outer edge of the glass just visible. Molten wax pooled unevenly around the wick with one small run down the inside. Deep brown background falling to black, warm amber palette, soft grain in the shadows, 2:3 portrait.

Edit prompt
Black acrylic surface giving a perfume bottle a controlled mirror reflection, generated with Krea 2 Large

Perfume bottle on black acrylic

Studio product photograph of a faceted clear glass perfume bottle with a heavy stopper, standing on a sheet of black acrylic that returns a sharp mirror reflection fading out about two thirds of the way down. Background a deep charcoal falling to black. A large softbox directly overhead throwing a bright band across the shoulders of the bottle, and two black flags either side keeping the glass edges dark and defined. The liquid inside a pale amber, catching one internal highlight. Reflection slightly darker than the object, 3:2 landscape.

Edit prompt
Macro of a cream swatch showing peaks, drag marks and a slight sheen, generated with Krea 2 Large

Cream swatch, no product

Extreme macro photograph of a thick cream swatch drawn across a sheet of pale stone, close enough that the surface structure reads. A raised ridge where the finger lifted off, fine drag lines through the body of the swatch, one soft peak holding its shape, and a slight satin sheen along the upper edge where the light catches. Cool white cream against warm grey stone. Hard low light from the right giving each ridge its own small shadow, background falling out of focus within two centimetres. Sharp texture, no gloss blowout, 4:5 portrait.

Edit prompt
Knolled flat-lay of a shaving set aligned to a strict grid, generated with Krea 2 Large

Shaving set, knolled

Top-down knolled flat-lay of a shaving set on a pale concrete surface, every object aligned strictly parallel or perpendicular to the frame edges with an even 20mm gap between each. A safety razor, a badger brush, a round soap in a tin, a folded linen cloth, a small bottle of oil, three loose blades in a neat row and a comb. Objects grouped by size from largest at the top to smallest at the bottom. Even soft overhead light with shallow shadows tight under each object. Restrained palette of steel, bone and pale concrete, 4:3.

Edit prompt
Ceramic vase lit through a coloured gel so the shadow carries the colour, generated with Krea 2 Large

Bone white vase, colour in shadow

Studio product photograph of a matte stoneware vase in bone white, lit by a single hard source through a deep amber gel placed to the right, so the long shadow it throws across the surface reads warm orange while the vase itself keeps its own colour. A second unfiltered light very low on the left just separating the base from the background. Plain putty grey seamless behind. The shadow shape doing most of the composition, running diagonally out of the lower left corner. Crisp shadow edges, matte glaze texture, 1:1 square.

Edit prompt
Stack of folded knitwear photographed to show loft and fibre halo, generated with Krea 2 Large

Three lambswool jumpers stacked

Product photograph of three folded lambswool jumpers stacked on a pale ash surface, shot slightly from above so the folded edges face the camera and the thickness of each garment reads. A low rim light from behind catching the loose fibres along every fold so each edge carries a soft halo. Colours stacked light to dark, oatmeal, fog grey and deep moss. Visible rib texture at the cuffs, one sleeve just out of alignment. Soft frontal fill keeping the face of the top garment even. Warm neutral palette, 1:1 square.

Edit prompt
Clear gel swatch on glass lit from below to show suspended bubbles, generated with Krea 2 Large

Clear gel lit from below

Macro photograph of a thick clear cosmetic gel spread across a sheet of glass and lit from directly beneath through a diffusion panel, so the light passes up through the gel and reveals dozens of suspended air bubbles at different depths. The edge of the spread showing a raised meniscus and a few thin strands where it was pulled. Faint refraction distorting the light behind it. Cool neutral colour, a black background above so the gel reads bright against dark. Extremely shallow depth of field, 4:5 portrait.

Edit prompt
Five colourways of the same bottle lined up with identical lighting, generated with Krea 2 Large

Five bottles in one row

Studio product photograph of five identical bottles in a single row, evenly spaced and all lit identically so the highlight sits in exactly the same place on each. The only variable is the colour of the glass, running left to right through clear, pale sage, terracotta, slate blue and near black. Matching brushed aluminium caps, matching small labels. Shot straight on at label height on a light grey seamless with a soft even shadow under the whole row. Sharp edges, no perspective distortion at the outer bottles, 16:9.

Edit prompt

简单定价

今天就免费开始,随时可以升级或取消。

Basic

$9/
账单金额为 $0 每年

900 每月 信用

1 个用户

所有模型

工作流

Standard

$24/
账单金额为 $0 每年

3200 每月 信用

1 个用户

所有模型

工作流

Pro

$45/
账单金额为 $0 每年

6200 共享 每月 信用

1 用户

+ 最多 4 人额外付费可增加

所有模型

工作流

Pro Max

$170/
账单金额为 $0 每年

24000 共享 每月 信用

1 用户

+ 最多 9 人额外付费可增加

所有模型

工作流

Enterprise

更高的限制

自定义

定价和账单条款

大容量信用
自定义席位限制
所有模型
工作流
Pricing Gradient

Free

供随意体验

$0

永久免费

最多 20 积分
仅1个用户
部分模型
工作流

常见问题

How do I use these product photography prompts?
Copy a prompt, paste it into Morphic with Krea 2 Large selected, and run it as written before you touch anything. Then swap in your own product and change one lighting clause at a time, so you can see which part of the set-up is producing the highlight you want.
Why is this library built for Krea 2 Large?
Product work is judged on surface: the edge of a highlight, the grain of leather, the exact way a label catches light. Krea 2 Large is the photorealistic, sharp-detail tier, and a side by side against the faster tier showed it holding the acrylic reflection and the glass edges that the faster one softens.
How do I get a clean cutout for a shop listing?
Ask for pure white with no gradient, a shadowless set-up using two large diffused sources at 45 degrees, and a thin contact shadow under the product only. Saying 'white background' alone usually returns a soft grey studio sweep, which will not sit cleanly on a listing page.
How do I control reflections on glass and metal?
Describe the reflection rather than the object. Naming what the surface should show, a soft white strip light down one side, a dark card on the other, or a single window shape, gives you a controllable highlight where 'shiny' gives you blown-out patches you cannot fix.
Can I use these images in a shop or an ad?
Yes. The prompts describe original products and fictional brands, so what you generate is yours to use. Keep real trademarks, packaging and a living person's likeness out of your own edits, and keep the final use in line with Morphic's terms.