What LTX 2.5 Reframe, Upscale and HDR do
LTX 2.5 Reframe, Upscale and HDR are three finishing tools from Lightricks, the team behind LTX 2.5. They work on a clip you already have and need no prompt:
- Reframe fits a clip into a new aspect ratio and generates the space around it.
- Upscale raises a clip to 1080p or 4K.
- HDR converts an SDR clip into an HDR file.
They have been on Morphic since November 13, 2026, on every paid plan. Every example in this guide starts as a clip made with MiniMax H3 Max Turbo on Morphic at 768p, finished with an LTX 2.5 tool on Morphic.
LTX 2.5 Reframe: the 16:9 original on the left, the 9:16 result at 1080x1920 on the right
How to use LTX 2.5 Reframe, Upscale and HDR, step by step
All three run through Copilot. Name LTX 2.5 in the request so Copilot picks these tools rather than another reframe, upscale or HDR model.
- 01
Add the clip
Put a generated or uploaded video in your project, or paste a link to it in the chat.
- 02
Ask Copilot
Name the tool and the setting: make a 4:5 version of this with LTX 2.5, upscale this to 4K with LTX 2.5, or convert this to HDR with LTX 2.5.
- 03
Check the result
The new clip lands next to the original. Check the edges of a reframe, fine detail in an upscale, and an HDR file on an HDR screen.
LTX 2.5 Reframe: one clip, five aspect ratios
Reframe takes 9:16, 4:5, 1:1, 5:4 or 16:9, at 720p or 1080p (the default). It does not crop. The original frame is scaled to fit the new shape and stays centred, and new picture fills the rest, so the subject never gets cut off. In our tests the centre stayed the original footage, frame for frame, and the original sound came through unchanged.
Here is one 16:9 clifftop walk reframed four ways, in order 9:16, 4:5, 1:1 and 5:4, each at 720p. The taller the shape, the more sky and ground Reframe adds.
One 16:9 clip reframed to 9:16, 4:5, 1:1 and 5:4
Reframe works the other way too. A vertical clip widened to 16:9 gets new scenery at the sides, and a wide studio shot made vertical gets more floor and ceiling.
9:16 to 16:9: mossy cliffs added at the sides
16:9 to 9:16: floor and ceiling added above and below
Because the whole frame is kept, the subject gets smaller as the shape gets taller: in a 9:16 cut of a 16:9 shot it fills about a third of the height. Shots framed loosely, with the subject near the centre, reframe best.
Which aspect ratio to pick
| Ratio | Use it for | What Reframe adds to a 16:9 source |
|---|---|---|
| 9:16 | Vertical short video and stories | A lot above and below |
| 4:5 | Portrait feed posts | Some above and below |
| 1:1 | Square posts | A little above and below |
| 5:4 | Landscape feed posts | A small strip above and below |
| 16:9 | Widescreen, from a vertical or square source | Scenery at the sides |
LTX 2.5 Upscale: 1080p or 4K
Upscale takes a target resolution, 1080p or 4K, rather than a factor like 2x. It scales the clip's short side to the target and keeps the shape, length and sound: our 1344x768 aerial came back at 3780x2160 for 4K, and a 1344x768 product shot at 1890x1080 for 1080p. The target must be above the clip's current size.
Below, the same crops at full size: a standard resize on the left, LTX 2.5 Upscale on the right. The jump to 4K shows the most, with sharper ripples and pebbles. The smaller step from 768p to 1080p is a modest gain, a little more edge on the cup's rim and speckles.
LTX 4K
Standard resize
LTX 1080p
Standard resize768p to 4K at full size: standard resize on the left, LTX 2.5 Upscale on the right
LTX 2.5 HDR: SDR to HDR
HDR converts an SDR clip to HDR at the same size. In our tests the file came back as 10-bit HEVC in HLG with BT.2020 colour. On an HDR screen its brightest parts, like a low sun or a sunlit window, glow above the white an SDR clip can reach. On an SDR screen, HLG is made to look like the original, so this page cannot show you the difference directly.
Instead, the clips below show the original with the areas the HDR file lifts above standard white marked in blue. We measured them from the HDR output: about a twentieth of the sunset frame and about a third of the window shot.
Sunset: the sun and brightest sky sit above standard white
Backlit room: the window sits above standard white
Two things to plan for. HDR makes bright areas brighter, but it cannot bring back detail the SDR clip had already lost to pure white. And the HDR file has no sound, so keep the original audio for your edit.
LTX 2.5 Reframe, Upscale and HDR settings and limits
- Reframe: 9:16, 4:5, 1:1, 5:4 or 16:9, at 720p or 1080p. No prompt. The source is kept whole and centred. The source must be at least one second long, and the result has the same length and sound.
- Upscale: a target of 1080p or 4K, above the clip's current size. Up to 2,401 frames at 1080p and 601 at 4K. Shape, length and sound are kept.
- HDR: same size as the source, delivered as a video file with no sound track.
- Where: Copilot in the chat. Name LTX 2.5 in the request.
- Plans: every paid plan. The cost depends on the clip's length and resolution; see pricing.
